Garmin 190-01178-00 Manual de usuario descargar pdf

Use these instructions to install the Garmin

AIS 300 Automatic Identication System (AIS) Class B receiver device. Compare the contents

of this package with the packing list on the box. If any pieces are missing, contact your Garmin dealer immediately.

Use the following instructions to install the AIS 300 device. Details for the following steps are included in this document:

1. Select locations for the AIS components.

2. Mount the AIS 300 receiver box.

3. Connect the AIS 300 to power.

4. Connect the AIS 300 to a VHF antenna and to an optional VHF radio (page 4).

5. Connect the AIS 300 to a NMEA 2000 network or to a NMEA 0183-compatible chartplotter (optional - page 4).



WARNING

When navigating, carefully compare information provided by the unit to all available navigation sources, including information from visual

sightings, local waterway rules and restrictions, and maps. For safety, always resolve any discrepancies or questions before continuing

navigation.

Use this unit only as a navigational aid. Do not attempt to use the unit for any purpose requiring precise measurement of direction, distance,

location, or topography.

This product, its packaging, and its components contain chemicals known to the State of California to cause cancer, birth defects, or

reproductive harm. This Notice is provided in accordance with California’s Proposition 65. See www.garmin.com/prop65 for more

information.



CAUTION

Wear safety goggles and a dust mask when drilling, cutting, or sanding.

Safe Compass Distance

Ensure that you install the AIS 300 receiver box at least 15

in. (40 cm) from any compass. Test your compass to verify that it operates

correctly when the AIS 300 is operating.

Selecting Locations for the AIS 300 Components

Use the wiring layout diagrams starting on page 2 to determine how to best organize the AIS 300 components on your boat. Ensure that the

cables reach all components before permanently mounting any component.

Mounting the AIS 300 Receiver Box

Install the AIS 300 receiver box below deck on a bulkhead. Select a location that is dry and protected from washdown. Ensure that the

location is well ventilated and away from objects that generate heat. Ensure that the receiver box is at least 15

in. (40 cm) from any

compass to avoid interference.

Needed Tools

Drill and drill bits

Number 2 Phillips screwdriver

To mount the receiver box:

1. Ensure that the chosen location is dry, protected from washdown, and well-ventilated.

2. Use the receiver box as a template, and use a pencil to mark the holes in the four corners. Do not drill through the receiver box.

3. Drill four

in. (3 mm) pilot holes.

4. Mount the receiver box using the included 20 mm M 3.5 screws. You can also use bolts, washers, and nuts (not included) to mount the

receiver box if the mounting surface is suitable.

•

March 2010 190-01178-00 Rev. B Printed in China

AIS 300 Installation Instructions

1 2 3 4 5 6 7 8

Indice de contenidos

Pagina 1 - Safe Compass Distance

Use these instructions to install the Garmin® AIS 300 Automatic Identication System (AIS) Class B receiver device. Compare the contents of this packa

Pagina 2 - Through NMEA 2000

2 AIS 300 Installation Instructions* The AIS 300 does not need to be installed alongside a VHF radio, but they can share the same VHF antenna if the

Pagina 3 - Through NMEA 0183

AIS 300 Installation Instructions 3AIS 300 power/data cable>>>>12 or 24 VdcChartplotter powerVHF radio powerVHF radio*(optional - not inc

Pagina 4

4 AIS 300 Installation InstructionsConnecting the Receiver Box to PowerUse the AIS 300 power/data cable to connect the receiver box to a 12 or 24 Vdc

Pagina 5 - Using the AIS 300

AIS 300 Installation Instructions 5Connecting the AIS 300 to a NMEA 0183 Device (Optional)You can connect the AIS 300 to a NMEA 0183-compliant chartp

Pagina 6 - Appendix

6 AIS 300 Installation InstructionsAppendixSpecicationsDimensions: W × H × D: 8 5/32 × 5 17/32 × 1 25/32 in. (207 × 140.6 × 45.7 mm)Weight: 1 lb. 7.

Pagina 7 - Limited Warranty

AIS 300 Installation Instructions 7Industry Canada ComplianceThis device complies with Industry Canada Standard RSS-182 and ICES-003.FCC ComplianceTh

Pagina 8

To obtain warranty service, contact your local Garmin authorized dealer or call Garmin Product Support for shipping instructions and an RMA tracking n

Modelos relacionados AIS 300

Comentarios a estos manuales

Sin comentarios

Garmin 190-01178-00 Manual de usuario

Busca en linea o descarga Manual de usuario para Accesorios Canotaje Garmin 190-01178-00. Garmin 190-01178-00 User Manual Manual de usuario

Indice de contenidos

Modelos relacionados AIS 300

Comentarios a estos manuales

Relacionado con productos y manuales para Accesorios Canotaje Garmin 190-01178-00