Garmin Software Version 0764.20 Guía de usuario Pagina 120

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 194
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 119
Cirrus Perspective
by Garmin – Cockpit Reference Guide for the SR20/SR22/SR22T
190-00821-10 Rev. A
104
Additional Features
Flight
InstrumentsEIS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
5)
Turn the large FMS Knob to select the network attribute to be edited.
6)
Turn the small FMS Knob to begin editing the field.
7)
When the entry is complete, press the ENT Key.
8)
Turn the large FMS Knob or press the ENT Key until ‘SAVE’ is highlighted.
9)
Press the ENT Key.
Disconnecting a Wi-Fi Network:
Select the DISCNCT Softkey.
Deleting a Saved Wi-Fi Network:
1)
While viewing the list of saved networks, press the FMS Knob to activate
the cursor.
2)
Turn either FMS Knob to highlight the network to be deleted.
3)
Select the DELETE Softkey. The selected network is removed from the list.
SCHEDULER
The Scheduler feature can be used to enter and display reminder messages (e.g.,
Change oil, Switch fuel tanks, or Altimeter-Transponder Check) in the Messages
Window on the PFD. Messages can be set to display based on a specific date and time
(event), once the message timer reaches zero (one-time; default setting), or recurrently
whenever the message timer reaches zero (periodic). Message timers set to periodic
alerting automatically reset to the original timer value once the message is displayed.
When power is cycled, all messages are retained until deleted, and message timer
countdown is resumed.
Entering a scheduler message:
1)
Select the AUX - Utility Page.
2)
Press the FMS Knob momentarily to activate the flashing cursor.
3)
Turn the large FMS Knob to highlight the first empty scheduler message
naming field.
4)
Use the FMS Knob to enter the message text to be displayed in the
Messages Window and press the ENT Key.
5)
Press the ENT Key again or use the large FMS Knob to move the cursor to
the field next to Type.
Vista de pagina 119
1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 193 194

Comentarios a estos manuales

Sin comentarios