Garmin 2006T Guía de usuario Pagina 52

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 116
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 51
Garmin G950 Cockpit Reference Guide for the Tecnam P2006T
190-01147-01 Rev. A
36
Procedures
Flight
InstrumentsEIS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
LOAD AN ARRIVAL PROCEDURE
1)
Press the PROC Key.
2)
Turn the large FMS Knob to highlight ‘SELECT ARRIVAL’.
3)
Press the ENT Key. The cursor is displayed in the ARRIVAL’ field with a list
of available arrivals.
4)
Turn the large FMS Knob to highlight the desired arrival.
5)
Press the ENT Key. A list of transitions is displayed for the selected arrival.
6)
Turn either FMS Knob to select the desired transition.
7)
Press the ENT Key. A list of runways may be displayed for the selected
arrival.
8)
Turn the large FMS Knob to highlight the desired runway.
9)
Press the ENT Key.
10)
With ‘LOAD?’ highlighted, press the ENT Key.
11)
The arrival becomes part of the active flight plan.
12)
If an altitude associated with a waypoint in an arrival procedure is to be
used to calculate vertical guidance perform the following steps:
a)
Press the FMS Knob to activate the cursor.
b)
Turn the large FMS Knob to highlight the desired waypoint altitude.
c)
Press the ENT Key to designate the altitude for use in giving vertical
guidance.
ACTIVATE AN ARRIVAL LEG
Activate Arrival using the Quick Select Box:
1)
Press the FPL Key on the MFD to display the active flight plan.
2)
Use the Joystick to move the Quick Select Box to the TO waypoint of the
desired leg within the arrival.
3)
Press the ACT LEG Softkey. A confirmation window showing the selected
leg is displayed.
4)
With ACTIVATE’ highlighted, press the ENT Key.
Vista de pagina 51
1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 115 116

Comentarios a estos manuales

Sin comentarios