Garmin Software Version 0370.13 Guía de usuario descargar pdf (Pagina 34)

Garmin G1000 Cockpit Reference Guide for the DA42

4-4

SECTION 4 – NAV/COM &

TRANSPONDER

DME Radio (optional)

The Tuning window is displayed by pressing the ADF/

DME softkey (if no ADF is installed, the softkey will be

labeled DME).

Figure 4-8 Radio Tuning Window

To change the DME tuning source:

1. From the Tuning window, turn the

large FMS

knob to highlight the DME source ﬁeld.

2. Turn the

small FMS

knob to display the selec-

tion window. Turn the

FMS

knobs to select the

desired mode and press the

ENT

key.

Figure 4-9 DME Selection Window

4.6 FREQUENCY AUTO-TUNING

Auto-tuning on the PFD

Figure 4-10 Nearest Airports Window (PFD)

1. Press the

NRST

softkey to display the Nearest

Airports Window.

2. Turn the

FMS

knobs to highlight the desired

frequency.

3. Press the

ENT

key to place the frequency in the

standby ﬁeld of the active COM.

4. Press the

Frequency Toggle

key to place the

frequency in the active ﬁeld.

NAV frequencies are entered automatically in the NAV

window upon approach loading or approach activation.

Auto-tuning on the MFD

Auto-tuning on the MFD is done in much the same

way as on the PFD. Use the FMS knobs to select the de-

sired frequency on any of the information pages. Pressing

the ENT key then loads the selected frequency into the

standby frequency window of the appropriate radio.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 93 94

Comentarios a estos manuales

Sin comentarios

Garmin Software Version 0370.13 Guía de usuario Pagina 34

Comentarios a estos manuales

Relacionado con productos y manuales para Navegadores Garmin Software Version 0370.13