Garmin Software Version 0500.00 Guía de usuario Pagina 88

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 132
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 87
Garmin G1000 Cockpit Reference Guide for the Beechcraft 58/G58
10-4
SECTION 10 – HAZARD
AVOIDANCE
Displaying Weather on the Weather Data Link
Page
To select the Weather Data Link Page:
1. Turn the
large FMS
knob to select the Map Page
Group.
2. Turn the
small FMS
knob to select the Weather
Data Link Page.
3. Press the available softkeys to select the desired
XM weather product.
4. Press the
LEGEND
softkey to view the legends
for the selected products. If necessary, turn
either
FMS
knob to scroll through the list. Press
the
small FMS
knob or the
ENT
softkey to return
to the map.
Figure 10-9 Weather Data Link Page
NEXRAD press the NEXRAD softkey to show
NEXRAD weather and radar coverage information.
Areas where radar coverage is not available will be
shown in grayish-purple. The display is updated
every five minutes.
NEXRAD Limitations
Certain limitations exist regarding the NEXRAD radar
displays. Some, but not all, are listed here:
NEXRAD base reflectivity does not provide
sufficient information to determine cloud layers or
precipitation characteristics (hail vs. rain, etc).
An individual NEXRAD site cannot depict high
altitude storms at close ranges, and has no
information about storms directly over the site.
The resolution of displayed NEXRAD data is 2
kilometers. Therefore, when zoomed in on the
display, each square block is 2 kilometers. The
intensity level reflected by the square will be the
highest level sampled within the 2 kilometer square
area.
ECHO TOP – press the ECHO TOP softkey to
show the location, elevation, and direction the
highest radar echo. This may not indicate the
top of a storm or clouds, only the highest radar
return echo. ECHO TOPS cannot be displayed
along with NEXRAD and CLOUD TOPS. When
ECHO TOPS is activated, NEXRAD and CLOUD
TOPS are removed. Refer to the Legend for a
description of the ECHO TOPS coding. The
display is updated every 7.5 minutes.
CLD TOP – press the CLD TOP softkey to show the
cloud top altitude determined from satellite imagery.
The display is updated every 15 minutes.
LTNG pressing the LTNG softkey shows the location
of cloud-to-ground lightning strikes. The display is
updated every five minutes.
NOTE: Strikes depicted represent cloud to ground
strikes within a 2 kilometer radius of the actual
strike location. Therefore, the exact location of
the strike is not displayed.
Vista de pagina 87
1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 131 132

Comentarios a estos manuales

Sin comentarios