Garmin Software Version 0720.14 Guía de usuario Pagina 26

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 156
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 25
G1000 Cockpit Reference Guide for the Piper PA-46 Mirage/Matrix
190-01107-03 Rev. A
10
Nav/Com/XPDR/Audio Panel
Flight
InstrumentsEICAS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
NAV/COM TUNING
1)
Press the small tuning knob to select the desired radio for tuning. A light
blue box highlights the radio frequency to be tuned.
2)
Turn the respective tuning knobs to enter the desired frequency into the
standby frequency field. The large knob enters MHz and the small knob
enters kHz.
3)
Press the Frequency Transfer Key to place the frequency into the active
frequency field.
SPLIT COM
During Split COM operation, both the pilot and the copilot can transmit
simultaneously over separate radios. The pilot can still monitor NAV1, NAV2, ADF,
DME, and MKR Audio as selected, but the copilot is only able to monitor COM2.
When Split COM operation is selected, COM1 is used by the pilot and COM2 is
used by the copilot. The COM1 MIC Annunciator flashes when the pilot’s microphone
PTT is pressed. The COM2 MIC Annunciator flashes when the copilot’s microphone
PTT is pressed.
Pressing the COM 1/2 Key selects Split COM operation. The COM 1/2 Annunciator
is illuminated indicating Split COM operation. COM1 and COM2 frequencies are
displayed in green indicating that both transceivers are active. Split COM operation
is cancelled by pressing the COM 1/2 Key again, at which time the annunciator is
extinguished.
DIGITAL CLEARANCE RECORDER AND PLAYER
NOTE: Only the audio for the selected
COM MIC
Key is recorded. Audio is
not recorded for COM3 MIC.
Pressing the PLAY Key once plays the latest recorded memory block, then returns
to normal operation.
Pressing the MKR/MUTE Key while playing a memory block stops play.
• Pressing the PLAY Key during play begins playing the previously recorded
memory block. Each subsequent press of the PLAY Key begins playing the next
previously recorded block.
Vista de pagina 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 155 156

Comentarios a estos manuales

Sin comentarios