Garmin Software Version 0858.07 Guía de usuario Pagina 106

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 112
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 105
Garmin G1000 Cockpit Reference Guide for the Beechcraft A36/G36
190-00525-03 Rev. A
Appendix
90
Flight
InstrumentsEIS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
12)
Turn the small FMS Knob to select the System Status Page.
13)
Press the Display Database Selection Softkey to show database information
for each display (MFD1 DB, PFD1 DB). Verify the correct database cycle
information is shown for each database for each display.
Canceling an automatic database synchronization:
1)
While synchronization is in progress, press the SYNC DBS Softkey to
disable automatic database synchronization.
2)
Acknowledge the cancelation by pressing the ENT Key.
Loading the Jeppesen navigation database:
NOTE: Loading the Jeppesen navigation database prior to its effective date
will result in the expiration date on the power-up screen and the effective
date on the AUX-System Status Page being displayed in yellow.
1)
Copy the new navigation database to an SD card obtained from Garmin, or
the aircraft manufacturer.
2)
With the G1000 system OFF, insert the SD card containing the new
navigation database version into the top card slot of the MFD (label of SD
card facing left).
3)
Turn the G1000 system ON. A prompt similar to the following illustration is
displayed:
Navigation Database Load Prompt
4)
Press the YES Softkey to update the navigation database in the MFD.
5)
After the update completes, the display starts in normal mode.
6)
Turn the G1000 system OFF and remove the SD card from the top card slot.
7)
Repeat steps 2 through 6 for the PFD.
Vista de pagina 105

Comentarios a estos manuales

Sin comentarios