Garmin Software Version 1308.07 Guía de usuario Pagina 33

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 194
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 32
Garmin G2000 Cockpit Reference Guide for the Cessna Corvalis T240
190-01264-01 Rev. A 17
Nav/Com/XPDR/Audio Panel
Flight
Instruments EIS
Nav/Com/
XPDR/Audio AFCS FMS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
4)
Press the small right knob to enter the new frequency as the NAV1/NAV2
standby frequency; or press and hold the small right knob to transfer the
new standby frequency to the active frequency.
Selecting a NAV frequency using the PFD Controller:
1)
On the PFD Controller, press the COM/NAV Button to display the COM/
NAV Window.
2)
Turn the large PFD Knob to move the cursor to the SOURCE field.
3)
Turn either PFD Knob to select the desired NAV.
4)
Press the ENT Key or the small PFD Knob to accept the selection and move
the cursor to the STBY frequency field.
5)
Turn the small PFD Knob one click to activate the editing cursor (flashing).
6)
Turn the large and small PFD knobs to tune the frequency (Large knob
increases/decreases MHz; Small knob increases/decreases kHz).
7)
Press the ENT Key or the small PFD Knob to accept the selection and move
the cursor to the XFER? field.
8)
Press the ENT Key or the small PFD Knob to transfer the standby frequency
to the active frequency.
ADF TUNING (OPTIONAL)
Selecting an ADF frequency:
1)
Touch the Audio & Radios Button on the Touchscreen Controller to
display the Audio & Radios Screen.
2)
Scroll the list to find the ADF enable/disable button.
3)
Touch the ADF control button to display the ADF Mode/Tuning Screen.
4)
Use the keypad to select the desired frequency.
5)
Touch the Enter Button to enter the new frequency as the ADF standby
frequency; or touch the XFER Button to enter the new frequency as the
ADF standby frequency and transfer it to the active frequency.
Or:
1)
Touch the Audio & Radios Button to display the Audio & Radios Screen.
2)
Scroll the list to find the ADF.
3)
Touch the ADF control button to display the ADF Mode/Tuning Screen.
Vista de pagina 32
1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 193 194

Comentarios a estos manuales

Sin comentarios