Garmin GHP 20 System for Yamaha Helm Master Manual de instalación descargar pdf (Pagina 3)

GHP 20 Installation Instructions 3





The GHP 20 autopilot system consists of multiple components.

Familiarize yourself with all of the components before beginning

installation. You must know how the components operate together in

order to correctly plan the installation on your boat.

As you familiarize yourself with the GHP 20 components, conrm that

your package includes the components identied below. If any parts are

missing, contact your Garmin dealer immediately.

Record the serial number of each component in the space provided.



The GHP 20 autopilot system consists of two main components, the

Course Computer Unit (CCU), and the GHC

™

20 user control interface.



The CCU acts as the brain of the GHP 20. The CCU contains the

sensory equipment used to determine heading. The CCU connects to the

steering system of your boat. The CCU also connects to a NMEA 2000

network to communicate with the GHC 20, and to optional NMEA

2000-compatible GPS devices (page 8).





The GHC 20 is the primary interface used to operate the GHP 20

autopilot system. Using the GHC 20, you engage and steer the GHP 20.

You also set up and customize the GHP 20 using the GHC 20.

The GHC 20 connects to a NMEA 2000 network to communicate

with the CCU. The GHC 20 also connects with optional NMEA

2000-compatible devices, such as a GPS device, to use advanced

features of the GHP 20. If NMEA 2000-compatible devices are

not available, you can connect the GHC 20 to optional NMEA

0183-compatible devices instead.





The GHP 20 autopilot system includes multiple cables. These cables

connect the components to power, to each other, to an alarm, and to

optional devices.



Notice

Do not connect the steering controller cable to a NMEA 2000 network.

The GHP 20 requires a powered CAN bus to communicate with the

steering controller. Ensure that the steering controller CAN bus is

properly powered and terminated. Consult the boat manufacturer if

needed.

This cable connects the CCU to the steering system of the boat. A

portion of this cable contains color-coded wires with bare ends. These

wires connect the CCU to the alarm.



The alarm provides audible alerts from the GHP 20 (page 7).



This cable can be used to connect the GHC 20 to optional

NMEA 0183-compatible devices (page 10).

1 2 3 4 5 6 7 8 ... 19 20

Comentarios a estos manuales

Sin comentarios

Garmin GHP 20 System for Yamaha Helm Master Manual de instalación Pagina 3

Comentarios a estos manuales

Relacionado con productos y manuales para Los sistemas de navegación para automóviles Garmin GHP 20 System for Yamaha Helm Master