Garmin GPSMAP 2210 Manual de usuario descargar pdf (Pagina 65)

GPSMAP 2206/2210 Owner’s Manual 57

MAIn Menu > AlArMs tAb

System Alarms

Use the System sub tab to set alarms for the system clock, batteries, and GPS

accuracy.

The System sub tab contains the following alarms:

•

Clock—provides an alarm for the system clock. Enter a time in the time

eld and turn the alarm on and off from the control eld menu. Remember

to enter alarm times in the same time format (UTC or local) you are using

for your system. The unit must be on for the clock alarm to work.

• Battery

—sets an alarm to sound when the battery reaches a user-

determined low voltage.

•

GPS Accuracy—sets an alarm to sound when the GPS location accuracy

falls outside the user-determined value.

Nav (Navigation) Alarms

Use the Nav sub tab to set navigational alarms, including anchor drag, arrival, and

off course.

• Anchor Drag—sets an alarm to sound when a specied drift distance is

exceeded. Enter a value in the distance eld, and use the control eld to

turn the alarm on and off.

•

Arrival—sets an alarm to sound when a specied distance or time away

from a destination waypoint is exceeded. Enter a distance, radius, or time

for sounding the alarm, and use the control eld to set the alarm to Off,

Dist (distance), or Time.

•

Off Course—sets an alarm to sound when you are off course by a specic

distance. Enter a distance in the distance eld, and use the control eld to

turn the alarm on and off.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 105 106

Sin comentarios

Garmin GPSMAP 2210 Manual de usuario Pagina 65