Garmin Software Version 0508.10 Guía de usuario Pagina 89

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 102
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 88
Garmin G1000 Cockpit Reference Guide for the Beechcraft 58/G58
190-00526-01 Rev. B
73
Annunciations & Alerts
Flight
Instruments EIS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
MISCELLANEOUS MESSAGE ADVISORIES (CONT.)
Message Comments
APR INACTV
Approach is not
active.
The system notifies the pilot that the loaded
approach is not active. Activate approach when
required.
SLCT FREQ
– Select appropriate
frequency for approach.
The system notifies the pilot to load the approach
frequency for the appropriate NAV receiver. Select
the correct frequency for the approach.
SLCT NAV
– Select NAV on CDI for
approach.
The system notifies the pilot to set the CDI to the
correct NAV receiver. Set the CDI to the correct
NAV receiver.
PTK FAIL
– Parallel track
unavailable: bad geometry.
Bad parallel track geometry.
PTK FAIL
– Parallel track
unavailable: invalid leg type.
Invalid leg type for parallel offset.
PTK FAIL
– Parallel track
unavailable: past IAF.
IAF waypoint for parallel offset has been passed.
UNABLE V WPT
– Can’t reach
current vertical waypoint.
The current vertical waypoint can not be reached
within the maximum flight path angle and vertical
speed constraints. The system automatically
transitions to the next vertical waypoint.
VNV
– Unavailable. Unsupported
leg type in flight plan.
The lateral flight plan contains a procedure turn,
vector, or other unsupported leg type prior to the
active vertical waypoint. This will prevent vertical
guidance to the active vertical waypoint.
VNV
– Unavailable. Excessive
crosstrack error.
The current crosstrack exceeds the limit, causing
vertical deviation to go invalid.
VNV
– Unavailable. Excessive track
angle error.
The current track angle error exceeds the limit,
causing the vertical deviation to go invalid.
VNV
– Unavailable. Parallel course
selected.
A parallel course has been selected, causing the
vertical deviation to go invalid.
NO WGS84 WPT
– Non WGS 84
waypoint for navigation -[xxxx]
The selected waypoint [xxxx] does not use the WGS
84 datum. Cross-check position with alternate
navigation sources.
Vista de pagina 88
1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 101 102

Comentarios a estos manuales

Sin comentarios