Garmin Software Version 0552.05 Guía de usuario Pagina 106

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 112
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 105
Garmin G1000 Cockpit Reference Guide for the Quest Kodiak 100
190-00645-02 Rev. A
Appendix
90
Flight
InstrumentsEIS
Nav/Com/
XPDR/AudioGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
OperationAnnun/AlertsAppendixIndex
DCLTR (3)
Selects desired amount of map detail;
cycles through declutter levels:
DCLTR (No Declutter): All map
features visible
DCLTR-1: Declutters land data
DCLTR-2: Declutters land and SUA
data
DCLTR-3: Removes everything except
the active flight plan
SHW CHRT
When available, displays optional
airport and terminal procedure charts
CHKLIST
When available, displays optional
checklists
DUAL NAVIGATION DATABASES
The dual navigation database feature allows each display to store an upcoming
navigation database on the bottom SD card so that the system can automatically load it
to replace the active database when the new database becomes effective (the next cycle
becomes available seven days prior to its effective date).
Uploading the standby database to the active location takes approximately 45-55
seconds.
Loading a Navigation Database
1)
With the system OFF, insert the SD card containing the navigation database
update into the top card slot of the desired PFD or the MFD.
2)
Verify that an SD card is inserted in the bottom slot.
3)
Turn the system ON.
4)
At the prompt, if it is desired to update the standby navigation database on
the bottom SD card, press the YES Softkey and proceed to step 6. If it is
desired to update the active navigation database, press the NO Softkey and
proceed to step 5.
5)
At the next prompt, press the YES Softkey to update the active navigation
database.
6)
After the update, the display starts in normal mode.
Vista de pagina 105

Comentarios a estos manuales

Sin comentarios