
Garmin G1000 Cockpit Reference Guide for the Quest Kodiak 100
190-00645-02 Rev. A
Appendix
92
Flight
InstrumentsEIS
Nav/Com/
XPDR/AudioGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
OperationAnnun/AlertsAppendixIndex
If an error occurs during the synchronization, an error message will be displayed,
followed by the affected display in the Sync Status section of the Database Window.
If a synchronization completes on one display, but an error occurs on another, the
error message will be displayed with the affected display listed after it. When an error
message is displayed, the problem must be corrected before the synchronization can
be completed. A power cycle is required to restart synchronization when ‘Card Full’
or ‘Err’ is shown.
Error Message Description
Canceled An active synchronization has been canceled using the SYNC DBS
Softkey
Card Full SD card does not contain sufficient memory
Err Displayed for all other errors that may cause the synchronization
process to be halted
Timeout System timed-out prior to the database transfer completing
The SYNC DBS Softkey on the AUX–System Status Page allows enabling and
disabling the automatic database synchronization feature. If the SYNC DBS Softkey
is pressed while a database synchronization is in progress, the current synchronization
process will be canceled.
Canceling Database Synchronization
1)
Turn the large FMS Knob to select the AUX Page group on the MFD.
2)
Turn the small FMS Knob to select the System Status Page.
3)
Press the SYNC DBS Softkey (if needed) to disable automatic database
synchronization.
4)
Acknowledge the cancellation by pressing the ENT Key.
Comentarios a estos manuales