Garmin Software Version 0720.12 Guía de usuario Pagina 77

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 122
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 76
Garmin G1000 Cockpit Reference Guide for the Piper PA-46 Meridian
190-00764-02 Rev. A
61
Annunciations & Alerts
Flight
Instruments EICAS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
ANNUNCIATIONS & ALERTS
CAS MESSAGES
If two alert levels of the same message are active simultaneously (e.g., DOOR AJAR
warning and DOOR AJAR advisory) only the higher alert level is displayed.
If a GEA or GIA fails, all CAS messages depending on sensors associated with that
LRU are automatically inhibited. Inhibits cannot be activated by invalid sensor data.
Warnings Messages
Warning Messages Description
ALTERNATOR FAIL Alternator has failed
ALTERNATOR OFF Alternator is off
ALTERNATOR AMPS Alternator current is too high
BLEED OVERTEMP Bleed over temperature
CABIN ALT 12000 Cabin altitude above 12,000 feet
CABIN DIFF PRESS Differential cabin pressure is high
DOOR AJAR Door is ajar (aircraft is in the air)
ENGINE FIRE Engine fire
FLAP FAIL A flap system failure has occurred
FUEL IMBALANCE Fuel imbalance is over 125 lbs
FUEL PRESS LOW Fuel pressure is low
FUEL QTY LOW Fuel quantity is less than 100 lbs
GENERATOR FAIL Generator has failed
GENERATOR OFF Generator is off
GENERATOR AMPS Generator current is too high
HYDR PUMP ON Hydraulic pump is on.
ITT Interstage turbine temperature high
OIL PRESSURE Low or high oil pressure
NG OVERSPEED Gas generator overspeed
OIL TEMPERATURE Low or high oil temperature
L/R PITOT HT FAIL Left and Right Pitot Heat Fail
PROP HEAT FAIL Propeller heat failure (aircraft is in the air)
PROP SPEED Propeller over or under-speed
SURF DE-ICE FAIL Surface de-ice fail
TORQUE Torque is too high
VOLTS Bus voltage is high or low
WNDSHLD OVRTEMP Windshield heater over-temperature or controller malfunction
Vista de pagina 76
1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 121 122

Comentarios a estos manuales

Sin comentarios