
Garmin G1000 Cockpit Reference Guide for the DA42
190-00406-05 Rev. B
10-20
SECTION 10 – HAZARD
AVOIDANCE
Adjusting Antenna Tilt on the Horizontal Scan
Display
1) Press the
FMS Knob to activate the cursor in the
TILT field.
2) Turn the small
FMS Knob to select the desired
antenna tilt angle.
3) Press the
ENT Key.
4) Press the
FMS Knob to remove the cursor.
The Joystick can also be used to adjust tilt up
and down.
Adjusting Antenna Tilt on the Vertical Scan
Display
1) Select the
TILT Softkey to activate the cursor in the
TILT field and display the Tilt Line as seen in Figure
10-32.
If the Tilt Line is not displayed, press the
MENU Key
and turn the large
FMS Knob to select ‘Show Tilt
Line’. Press the ENT Key.
2) Turn the small
FMS Knob to adjust the antenna tilt
angle. The selected tilt angle will be implemented
when Horizontal Scan is again selected.
The Joystick can also be used to adjust tilt.
Figure 10-32 Adjusting Tilt on Vertical Scan Display
Scan Line
Tilt Line
Comentarios a estos manuales