Garmin GMM 150 Marine Monitor Manual de instalación descargar pdf (Pagina 3)

Item Description

Fuse

Battery

6 ft. (1.8 m) no extension

Item Description

Splice

• 10 AWG (5.26 mm²) extension wire, up to 15 ft. (4.6 m)

• 8 AWG (8.36 mm²) extension wire, up to 23 ft. (7 m)

• 6 AWG (13.29 mm²) extension wire, up to 36 ft. (11 m)

Fuse

8 in. (20.3 cm)

Battery

8 in. (20.3 cm)

36 ft. (11 m) maximum extension

Connecting the GMM to a GPSMAP 8500

NOTICE

A blue rubber seal is included for each DVI port on the device.

This seal must be installed between each DVI port and DVI-

cable connector to avoid damage to the connectors.

This device can connect to a GPSMAP 8500 with touchscreen

control.

Route a Garmin Marine Network cable and a DVI-D cable to

the GMM and the GPSMAP 8500.

Install a locking ring and an o-ring on each end of the Garmin

Marine Network cable.

Connect the Garmin Marine Network cable to the GARMIN

PROCESSOR BOX port on the GMM and to the GARMIN

MONITOR port on the GPSMAP 8500.

Connect the DVI-D cable to the MAIN DVI VIDEO IN port on

the GMM and to the MAIN DVI-I VIDEO OUT port on the

GPSMAP 8500.

Video Input Considerations

NOTICE

A blue rubber seal is included for each DVI port on the device.

This seal must be installed between each DVI port and DVI-

cable connector to avoid damage to the connectors.

A gray rubber seal is included for each VGA port on the device.

This seal must be installed between each VGA port and VGA-

cable connector to avoid damage to the connectors. When

installing the seal, the arrow on the side of the seal must point

toward the device.

The GMM allows video input from two digital sources, three

VGA sources, one component source, and three composite

sources. When connecting video input sources, observe these

considerations.

• The two digital ports are labeled MAIN DVI VIDEO IN and

DVI VIDEO 2 IN. These two ports use DVI-D connectors. If

needed, you can use a DVI-D to HDMI adapter to connect to

a HDMI-compatible video source.

◦ The MAIN DVI VIDEO IN port is designed for use with a

GPSMAP 8500 device.

◦ To function as a touchscreen input device with a

GPSMAP 8500, the GMM must connect to the GPSMAP

8500 through the MAIN DVI VIDEO IN port with a DVI-D

cable, and it must also connect to the GPSMAP 8500

through the GARMIN PROCESSOR BOX port with a

Garmin Marine Network cable. See page 3 for more

information.

• The three VGA ports are labeled VGA VIDEO 1 IN, VGA

VIDEO 2 IN, and VGA VIDEO 3 IN. These ports use

standard VGA connectors for connections to sources such

as a computer.

• The component-video port is labeled COMPONENT IN. This

port uses BNC connectors. You can use BNC to RCA

adapters to connect a component-video source with RCA

connectors to this port.

• The three composite-video ports are labeled CVBS 1 IN,

CVBS 2 IN, and CVBS 3 IN. These three ports use BNC

connectors. You can use a BNC to RCA adapter to connect

a composite-video source with RCA connectors to these

ports.

Specifications

Physical Specifications

Device Specification Measurement

GMM 150 Dimensions

(W×H×D)

× 12

in. (378.2 ×

329.7 × 74.3 mm)

Display size (W×H) 11

in. × 8

in. (304.1 × 228.1

mm)

Weight 9.572 lbs (4.342 kg)

GMM 170 Dimensions

(W×H×D)

× 14

× 2

in. (410.7 ×

371.1 × 75.3 mm)

Display size (W×H) 10

in. × 13

in. (270.3 × 337.9

mm)

Weight 8.828 lbs (4.458 kg)

GMM 190 Dimensions

(W×H×D)

× 15

× 3

in. (464.3 ×

403.1 × 81.8 mm)

Display size (W×H) 11

in. × 14

in. (301.3 × 376.3

mm)

Weight 11.982 lbs (5.435 kg)

All models Material Aluminum sheet metal

Temperature range From 5° to 122°F (from -15° to 50°C)

Electrical Specifications

Device Specification Measurement

All models Input power 10–32 Vdc

Fuse 15 A, 42 V fast-acting

GMM 150 Max. power usage at 10 Vdc 30 W

Typical current draw at 12 Vdc 2.4 A

Max. current draw at 12 Vdc 2.5 A

Compass-safe distance 3

in. (100 mm)

GMM 170 Max. power usage at 10 Vdc 60 W

Typical current draw at 12 Vdc 4.8 A

Max. current draw at 12 Vdc 5 A

Compass-safe distance 3

in. (100 mm)

GMM 190 Max. power usage at 10 Vdc 120 W

Typical current draw at 12 Vdc 9.8 A

Max. current draw at 12 Vdc 10 A

Compass-safe distance 1

in. (50 mm)

1 2 3 4

Comentarios a estos manuales

Sin comentarios

Garmin GMM 150 Marine Monitor Manual de instalación Pagina 3

Comentarios a estos manuales

Relacionado con productos y manuales para No Garmin GMM 150 Marine Monitor