Garmin Software Version 0734.27 Guía de usuario Pagina 167

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 174
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 166
Cockpit Reference Guide for the Prodigy
®
Flight Deck 300
190-00761-01 Rev. A
Appendix
151
Flight
Instruments EAS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
5)
Acknowledge the Power-up Page agreement by pressing the ENT Key or
the right most softkey.
6)
Turn the large FMS Knob to select the AUX Page group on the MFD.
7)
Turn the small FMS Knob to select the System Status Page.
8)
Make sure the SYNC DBS Softkey is in the enabled state.
9)
Monitor the Sync Status in the Database Window. Wait for all databases to
complete synching, indicated by ‘Complete’ being displayed.
10)
Remove and reapply power to the system.
11)
Turn the large FMS Knob to select the AUX Page group on the MFD.
12)
Turn the small FMS Knob to select the System Status Page.
13)
Select the Display Database Selection Softkey to show database information
for each display (MFD1 DB, PFD1 DB). Verify the correct database cycle
information is shown for each database for each display.
Canceling an automatic database synchronization:
1)
While synchronization is in progress, select the SYNC DBS Softkey to
disable (Figure B-2) automatic database synchronization.
2)
Acknowledge the cancelation by pressing the ENT Key.
Loading the Jeppesen navigation database:
NOTE: Loading the Jeppesen navigation database prior to its effective date
will result in the expiration date on the power-up screen and the effective
date on the AUX-System Status Page being displayed in yellow.
1)
Copy the new navigation database to an SD card obtained from Garmin, or
the aircraft manufacturer.
2)
With the Prodigy
®
system OFF, insert the SD card containing the new
navigation database version into the top card slot of the MFD (label of SD
card facing left).
3)
Turn the Prodigy
®
system ON. A prompt similar to the following illustration
is displayed:
Vista de pagina 166

Comentarios a estos manuales

Sin comentarios