Garmin Software Version 0764.14 Guía de usuario Pagina 175

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 184
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 174
Cirrus Perspective
by Garmin – Cockpit Reference Guide for the SR20/SR22/SR22T
190-00821-08 Rev. A
Appendix
159
Flight
Instruments EIS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
7)
Press the NO Softkey. The display now starts in normal mode. Since the
database effective date is not yet valid, it should not be loaded as the
active database. The display now starts in normal mode. Do not remove
power while the display is starting.
8)
Press the ENT Key to acknowledge the startup screen.
9)
Turn the large FMS Knob to select the AUX Page group on the MFD.
10)
Turn the small FMS Knob to select the System Status Page.
11)
The new database is copied to the SD card in the bottom card slot of each
PFD. Progress can be monitored in the SYNC STATUS field. When copying
is finished, ‘Complete’ is displayed.
NOTE: During the synchronization process, version differences between
standby navigation databases will exist. This will result in the system
displaying a ‘DB Mismatch’ alert for the standby navigation databases. This
alert will remain until the next power cycle.
12)
Turn system power OFF.
13)
Remove the SD card from the top card slot of the MFD.
14)
Turn system power ON.
15)
Press the ENT Key to acknowledge the startup screen.
16)
Turn the large FMS Knob to select the AUX Page group on the MFD.
17)
Turn the small FMS Knob to select the System Status Page.
18)
Press the Display Database Selection Softkey to show standby navigation
database information for each display (MFD1 DB, PFD1 DB). Verify the
correct standby navigation database cycle information is shown for each display.
Vista de pagina 174
1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 183 184

Comentarios a estos manuales

Sin comentarios