Garmin Software Version 0764.14 Guía de usuario Pagina 61

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 184
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 60
Cirrus Perspective
by Garmin – Cockpit Reference Guide for the SR20/SR22/SR22T
190-00821-08 Rev. A 45
Flight Planning
Flight
Instruments EIS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
a)
Turn the small FMS Knob to the left. Initially, a flight plan waypoint list
is displayed.
b)
Turn the small FMS Knob to the right to display the ‘RECENT’
waypoints.
c)
Turn the large FMS Knob to select the desired waypoint.
d)
Press the ENT Key.
e)
Press the ENT Key again to “accept” the waypoint.
ENTER AN AIRWAY IN A FLIGHT PLAN
Enter airway using the Quick Select Box:
1)
Press the FPL Key on the PFD/MFD Control Unit to display the active flight
plan.
2)
Use the Joystick to move the Insertion Point Indicator to the desired entry
point in the flight plan list.
3)
Begin entering the identifier of the airway entry waypoint using the PFD/
MFD Control Unit’s alphanumeric keys. The Waypoint Information Window
is displayed as the identifier is entered.
4)
Press the ENT Key. The Quick Select Box and Insertion Point Indicator are
now located following the newly entered waypoint.
5)
Press the MENU Key and select “Load Airway” (required on the PFD). The
Select Airway Page is displayed. The “Load Airway” menu item is available
only when an acceptable airway entry waypoint has been entered in step 3
(the waypoint ahead of the Insertion Point Indicator).
6)
Turn the FMS Knob to select the desired airway from the list, and press the
ENT Key. Low altitude airways are shown first in the list, followed by “all”
altitude airways, and then high altitude airways.
7)
Turn the FMS Knob to select the desired airway exit point from the list, and
press the ENT Key. ‘LOAD?’ is highlighted.
8)
Press the ENT Key. The system returns to editing the flight plan with the
new airway inserted.
Enter airway using the cursor:
1)
Press the FPL Key on the PFD/MFD Control Unit.
2)
Press the FMS Knob to activate the cursor (not required on the PFD).
Vista de pagina 60
1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 183 184

Comentarios a estos manuales

Sin comentarios