Garmin GPSMAP 192C Manual de usuario descargar pdf (Pagina 102)

96 GPSMAP 192C Owner’s Manual

APPENDIX > MOUNTING THE GPSMAP 192C UNIT

To install the GPSMAP 192C unit:

1. Select the location of the mounting bracket.

2. Mark and drill the four mounting holes for the fastener you

are using.

3. Fasten the bracket to the surface using the appropriate

fastener.

4. Insert the GPSMAP 192C into the mounting bracket. The

bracket is designed for a tight ﬁt to provide additional

support when swiveling the unit.

5. Screw the two mounting knobs through the bracket and into

the display case.

6. Connect the power/data and antenna cables (external

antenna only) to the back of the unit, making sure the

locking rings are fully tightened on both connectors.

The GPSMAP 192C with external antenna can be ﬂush mounted

on a ﬂat panel of .08-.52" thickness using the cam lobe feature on

its gimbal mounting bracket. When ﬂush mounting the GPSMAP

192C, be sure to choose an appropriately sized location for the

unit (see unit dimensions on page 93) and leave 1.25" (32 mm)

clearance below the data card slot for inserting or removing data

cards.

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 123 124

Sin comentarios

Garmin GPSMAP 192C Manual de usuario Pagina 102