Garmin GPSMAP 192C Manual de usuario descargar pdf (Pagina 78)

72 GPSMAP 192C Owner’s Manual

MAIN MENU > COMM TAB

Comm (Communications) Tab

The Communications tab controls the input/output format used

when connecting your GPSMAP 192C to external NMEA devices,

such as an external Sonar Module, a DGPS beacon receiver, a

personal computer, or another Garmin unit.

NOTE: If a DGPS receiver is used, WAAS capability is

automatically turned to Off. See page 99 for wiring and NMEA

version information.

The unit supports two input/output ports.

Port 1

• Garmin Data Transfer—is the proprietary format used

to upload/download MapSource data, exchange waypoint,

route, track, almanac, and proximity data with a PC or

another Garmin unit. When you select Garmin Data Transfer,

there are 11 Transfer Modes to choose from: Host, Request

Almanac, Request Proximity, Request Routes, Request

Tracks, Request Waypoints, Send Almanac, Send Proximity,

Send Routes, Send Tracks, and Send Waypoints.

• Garmin Remote Sonar—supports a Garmin external Sonar

Module interface.

• NMEA In/NMEA Out—supports the input/output of

standard NMEA 0183 data, and sonar NMEA input support

for the DPT, MTW and VHW sentences.

• None—provides no interfacing capabilities.

Port 2

• Garmin Remote Sonar—supports a Garmin external Sonar

Module interface.

• Garmin DGPS—supports connections with a Garmin DGPS

beacon receiver.

• Other DGPS—supports DGPS input using a standard

RTCM format, without any output capabilities.

• NMEA In/NMEA Out—supports the input/output of

standard NMEA 0183 data, and sonar NMEA input support

for the DPT, MTW and VHW sentences. You can also adjust

the NMEA output.

• RTCM In/NMEA Out—supports Differential GPS (DGPS)

input using a standard RTCM format and also provides

NMEA 0183 output.

• None—provides no interfacing capabilities.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 123 124

Sin comentarios

Garmin GPSMAP 192C Manual de usuario Pagina 78