Garmin Software Version 0530.04 Guía de usuario Pagina 125

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 186
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 124
Garmin G1000 Cockpit Reference Guide for the Cessna 350/400
190-00567-01 Rev. B
8-1
SECTION 8 – FLIGHT PLANNING
SECTION 8: FLIGHT PLANNING
The following discussions pertain to the Multi Function
Display, unless otherwise indicated.
8.1 USER DEFINED WAYPOINTS
Figure 8-1 User WPT Information Page
Select the User WPT Information Page
1)
Turn the large
FMS
Knob to select the ‘WPT’ page
group.
2)
Turn the small
FMS
Knob to select the fifth
rectangular page icon.
Create a New User Waypoint
1)
With the User Waypoint Information Page displayed,
press the
NEW
Softkey. A waypoint is created at
the current aircraft position.
2)
Turn the small
FMS
Knob to enter first character of
the waypoint name.
3)
Turn the large
FMS
Knob to move the cursor to the
next character field.
4)
Repeat steps 2 and 3 until the desired name is
entered.
5)
Press the
ENT
Key.
6)
The cursor is now in the ‘REFERENCE WAYPOINTS’
field. If desired, the waypoint can be modified by
changing the reference waypoint. Turn the
FMS
Knobs to enter the position coordinates or the radial
and distance from the reference waypoint.
7)
Press the
FMS
Knob to remove the flashing
cursor.
Modify a User Waypoint
1)
With the User Waypoint Information Page displayed,
press the
FMS
Knob to activate the cursor.
2)
Turn the large
FMS
Knob to move the cursor to the
desired field and turn the small
FMS
Knob to make
changes.
3)
Press the
ENT
Key to accept the changes.
4)
Press the
FMS
Knob to remove the flashing
cursor.
Delete a User Waypoint
1)
Select the User Waypoint Information Page and
press the
DELETE
Softkey.
2)
The message ‘Would you like to delete the user
waypoint’ is displayed. With ‘YES highlighted,
press the
ENT
Key.
Create User Waypoints from the Navigation
Map Page
1)
With the Navigation Map Page displayed, push
the
Joystick
to activate the panning function. The
target pointer is displayed at the present aircraft
position.
2)
Move the
Joystick
to place the pointer at the
desired position
Vista de pagina 124
1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 185 186

Comentarios a estos manuales

Sin comentarios