Garmin Software Version 0552.14 Guía de usuario Pagina 72

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 126
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 71
Garmin G1000 Cockpit Reference Guide for the Quest KODIAK 100
190-00645-05 Rev. A
56
Additional Features
Flight
InstrumentsEIS
Nav/Com/
XPDR/AudioGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
OperationAnnun/AlertsAppendixIndex
Entering a Channel Directly
1)
While on the XM Radio Page, press the CHNL Softkey.
2)
Press the DIR CH Softkey. The channel number in the Active Channel Box
is highlighted.
3)
Press the numbered softkeys located on the bottom of the display to
directly select the desired channel number.
4)
Press the ENT Key to activate the selected channel.
Assigning Channel Presets
Up to 15 channels from any category can be assigned a preset number.
1)
On the XM Radio Page, with the desired channel active, press the PRESETS
Softkey to access the first five preset channels (PS1 - PS5).
2)
Press the MORE Softkey to access the next five channels (PS6 – PS10),
and again to access the last five channels (PS11 – PS15). Pressing the
MORE Softkey repeatedly cycles through the preset channels.
3)
Press any one of the (PS1 - PS15) softkeys to assign a number to the
active channel.
4)
Press the SET Softkey on the desired channel number to save the channel
as a preset.
Adjusting Volume
Radio volume is controlled at each passenger station.
ELECTRONIC CHECKLISTS
The system accesses the checklists from an SD card inserted into the card slot.
IftheSDcardcontains an invalid checklist leornochecklist,thePower-up Page
messages display ‘Checklist File: Invalid’ or ‘Checklist File: N/A’ (not available) and the
CHKLIST Softkey is not available.
Accessing and Navigating Checklists
1)
From any page on the MFD, press the CHKLIST Softkey.
2)
Turn the large FMS Knob to select the ‘GROUP’ field.
3)
Turn the small FMS Knob to select the desired procedure and press the
ENT Key.
Vista de pagina 71
1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 125 126

Comentarios a estos manuales

Sin comentarios