Garmin Software Version 0563.32 Guía de usuario Pagina 41

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 182
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 40
Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
190-00384-13 Rev. B 23
GPS Navigation
Flight
Instruments EIS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
GPS NAVIGATION
DIRECT-TO NAVIGATION
Direct-to Navigation from the MFD
1)
Press the
Direct-to
( )
Key.
2)
Enter the destination waypoint identifier.
3)
Press the
ENT
Key to confirm the identifier. The ‘Activate?’ field is
highlighted.
4)
If no altitude constraint or course is desired, press the
ENT
Key to activate.
To enter an altitude constraint, proceed to step 5.
5)
Turn the large
FMS
Knob to place the cursor over the ‘VNAV’ altitude field.
6)
Enter the desired altitude.
7)
Press the
ENT
Key. The option to select ‘MSL’ or AGL’ is now displayed.
8)
Turn the small
FMS
Knob to select ‘MSL’ or AGL’.
9)
Press the
ENT
Key. The cursor is placed in the ‘VNV’ offset distance field.
10)
Enter the desired target altitude offset from the selected Direct-to.
11)
Press the
ENT
Key to highlight Activate?’ or turn the large
FMS
Knob to
highlight the ‘COURSE’ field.
12)
Enter the desired course to the waypoint.
13)
Press the
ENT
Key to highlight ACTIVATE?’.
14)
Press the
ENT
Key again to activate the Direct-to.
Direct-to Navigation from the PFD
1)
Press the Direct-to Key
( )
.
2)
Turn the large FMS Knob to place the cursor in the desired selection field.
3)
Turn the small FMS Knob to begin selecting the desired identifier, location,
etc.
4)
Press the ENT Key.
5)
The cursor is now flashing on ACTIVATE?’. If no altitude constraint or
course is desired, press the ENT Key to activate. To enter an altitude
constraint, proceed to step 6.
Vista de pagina 40
1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 181 182

Comentarios a estos manuales

Sin comentarios