Garmin Software Version 0563.32 Guía de usuario Pagina 58

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 182
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 57
Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
190-00384-13 Rev. B
40
Flight Planning
Flight
InstrumentsEIS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
9)
Use the FMS Knobs to edit the Expect Further Clearance Time (EFC TIME),
and press the ENT Key.
10)
Press the ENT Key while ‘LOAD?’ is highlighted to add the hold into the
flight plan.
Creating a user-defined hold at the aircraft present position:
1)
Press the FPL Key to display the Active Flight Plan Page (MFD) or the Active
Flight Plan Window (PFD).
2)
Press the MENU Key, highlight ‘Hold At Present Position’, and press the
ENT Key. The HOLD AT window appears with the course field highlighted.
3)
Use the FMS Knobs to edit the entry course, and press the ENT Key.
4)
Use the small FMS Knob to select ‘INBOUND’ or ‘OUTBOUND’ course
direction, and press the ENT Key.
5)
Use the small FMS Knob to select ‘TIME’ or ‘DIST’ length mode, and press
the ENT Key.
6)
Use the FMS Knobs to edit the length, and press the ENT Key.
7)
Use the small FMS Knob to select ‘RIGHT’ or ‘LEFT’ turn direction, and
press the ENT Key.
8)
Use the FMS Knobs to edit the Expect Further Clearance Time (EFC TIME),
and press the ENT Key.
9)
Press the ENT Key while ACTIVATE?’ is highlighted to create an Offroute
Direct-to hold waypoint and activate the hold.
Creating a user-defined hold at a Direct To waypoint:
1)
Press a Direct-to Key and set up the Direct To waypoint as desired, but
select ‘HOLD?’ instead of ACTIVATE?’ when finished (MFD or PFD).
2)
Use the FMS Knobs to edit the entry course, and press the ENT Key.
3)
Use the small FMS Knob to select ‘INBOUND’ or ‘OUTBOUND’ course
direction, and press the ENT Key.
4)
Use the small FMS Knob to select ‘TIME’ or ‘DIST’ length mode, and press
the ENT Key.
5)
Use the FMS Knobs to edit the length, and press the ENT Key.
6)
Use the small FMS Knob to select ‘RIGHT’ or ‘LEFT’ turn direction, and
press the ENT Key.
Vista de pagina 57
1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 181 182

Comentarios a estos manuales

Sin comentarios