Garmin Software Version 0321.19 Manual de usuario Pagina 48

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 55
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 47
FAA APPROVED AIRPLANE FLIGHT MANUAL SUPPLEMENT
GARMIN G1000 INTEGRATED AVIONICS SYSTEM
DIAMOND MODEL DA 40
DIAMOND MODEL DA 40 F
190-00492-11 Rev 8 Diamond DA 40 / DA 40F
4B-3
PFD, MFD, AND GIA OVERHEAT
(a) PFD OVERHEAT caution
NOTE
The PFD is approaching its operating temperature limit. Display brightness
is automatically reduced to 50% of maximum.
1. Cross check PFD attitude, heading, altimeter, and airspeed with
standby instruments.
2. If PFD primary flight instruments do not agree with standby flight
instruments, or the PFD fails or is unusable, select Display
Reversionary Mode using the red DISPLAY BACKUP button on the
audio panel. Pull the PFD circuit breaker.
(b) MFD OVERHEAT caution
NOTE
The MFD is approaching its operating temperature limit. Display
brightness is automatically reduced to 50% of maximum.
1. Select Display Reversionary Mode using the red DISPLAY BACKUP
button on the audio panel.
2. Cross check MFD engine instruments and primary flight instruments
with the PFD. If the MFD does not agree with the PFD, or the MFD
fails or is unusable, pull the MFD circuit breaker.
(c) PFD OVERHEAT caution
AND
MFD OVERHEAT caution
NOTE
The PFD and MFD are both approaching operating temperature limits. The
brightness of both displays is automatically reduced to 50% of maximum.
1. Refer to standby attitude, heading, altimeter, and airspeed instruments
to maintain aircraft control.
2. If either the PFD or MFD fails or is unusable, pull the circuit breaker of
the affected device and select Display Reversionary Mode using the red
DISPLAY BACKUP button on the audio panel.
3. Land as soon as practical at a suitable airport.
Vista de pagina 47
1 2 ... 43 44 45 46 47 48 49 50 51 52 53 54 55

Comentarios a estos manuales

Sin comentarios