Garmin Software Version 0369.13 Guía de usuario Pagina 126

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 184
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 125
Garmin G1000 Cockpit Reference Guide for the DA40/40F
190-00324-07 Rev. A
8-4
SECTION 8 – FLIGHT PLANNING
8.7 CREATE A NEW FLIGHT PLAN
Create a New Flight Plan Using the MFD
1)
Press the
FPL
Key and turn the small
FMS
Knob to
display the Flight Plan Catalog Page.
2)
Press the
NEW
Softkey to display a blank flight plan
page for the first empty storage location.
Figure 8-10 Create FPL on MFD
3)
Turn the small
FMS
Knob to display the Waypoint
Information Window.
4)
Turn the small
FMS
Knob to the right enter the first
character of the identifier of the departure airport.
Turning the knob to the left will access the FPL,
NRST, and RECENT waypoint list.
5)
Turn the large
FMS
Knob to move the cursor to the
next character field. Repeat steps 4 and 5 until the
desired identifier has been entered.
Figure 8-11 Waypoint Info Window
6)
Press the
ENT
Key.
7)
Repeat step number 3, 4, and 5 to enter the
identifier for each additional flight plan waypoint.
8)
When all waypoints have been entered, press the
FMS
Knob to return to the Flight Plan Catalog Page.
The new flight plan is now in the list.
Create a New Flight Plan Using the PFD
NOTE: A flight plan cannot be entered using the
PFD if another flight plan is active.
NOTE: After the first leg is entered (using the
PFD only), it is immediately activated.
1)
Press the
FPL
Key, then press the
FMS
Knob to
activate the cursor.
2)
Turn the small
FMS
Knob to enter the first letter of
the departure airport identifier. Turn the large
FMS
Knob to the right to move the cursor to the next
character position.
3)
Repeat step 2 to spell out the rest of the waypoint
identifier.
4)
Press the
ENT
Key and the cursor is now ready for
entering of the next flight plan waypoint.
5)
Repeat steps 2 through 4 to enter the identifier for
each additional flight plan waypoint.
6)
Once all waypoints have been entered, press the
FMS
Knob to remove the cursor. The new flight
plan is now active.
Figure 8-12 Creating Flight Plan on the PFD
Vista de pagina 125
1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 183 184

Comentarios a estos manuales

Sin comentarios