
Garmin G1000 Cockpit Reference Guide for the DA40/40F
190-00324-07 Rev. A
2-4
SECTION 2
FLIGHT INSTRUMENTS
2.3 ALTIMETER
Altitude
Reference
Box
Altitude
Trend
Vector
Current
Altitude
Barometric
Setting
Box
Altitude
Reference
Bug
Figure 2-7 Altimeter
Barometric
Altitude
Minimums Bug
Selected Altitude Bug
The Selected Altitude Bug is displayed at the Selected
Altitude or the edge of the tape (whichever is closer to the
current altitude) to provide increased altitude awareness
and to set the desired hold altitude for the autopilot.
Set the Selected Altitude Bug:
Turn the
ALT
Knobs to set the Selected Altitude Bug.
The
small ALT
Knob sets the hundreds and the
large
ALT
Knob sets the thousands. This altitude also
appears in the Selected Altitude Box above the
Altimeter.
Altitude Trend Vector
The end of the trend vector displays approximately
what the altitude will be in six seconds if the current rate
of vertical speed is maintained.
Barometric Setting Box
Select barometric pressure:
Turn the BARO Knob to select the desired
setting.
Quickly enter standard pressure:
1)
Press the PFD Softkey.
2)
Press the STD BARO Softkey.
Altitude Alerting
Figure 2-8 Altitude Alerting Visual Annunciations
Within 1000 ft
Within 200 ft
Deviation of ±200 ft
Visual annunciations appear in the Altitude Reference
Box. Whenever the setting is changed, the Altitude
Alerter is reset. The Altitude Alerter is independent of the
Automatic Flight Control System.
Comentarios a estos manuales