Garmin Software Version 0369.13 Guía de usuario Pagina 54

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 184
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 53
Garmin G1000 Cockpit Reference Guide for the DA40/40F
190-00324-07 Rev. A
4-6
SECTION 4 – NAV/COM &
TRANSPONDER
Enter Code Using the FMS Knob
1)
Press the
XPDR
Softkey to display the transponder
Mode Selection softkeys.
2)
Press the
CODE
Softkey to display the transponder
Code Selection softkeys, which includes the digit
softkeys.
3)
Turn the small FMS Knob to enter the first two
digits.
4)
Turn the large FMS Knob to place the cursor in
position to change the second two digits.
5)
Turn the small FMS Knob to enter the second two
digits.
6)
Press the ENT Key to activate the code immediately,
or wait 10 seconds and the code will become
active.
Flight ID Reporting
If so configured, the Flight ID may be entered in the
Timer/Reference Window.
Figure 4-16 Timer/References Window
Flight ID
1)
Press the
TMR/REF
Softkey to display the Timer/
References Window.
2)
Turn the large FMS Knob to place the cursor in the
Flight ID field.
3)
Turn the small FMS Knob to enter the desired first
character.
4)
Turn the large FMS knob to place the cursor in the
next desired field.
5)
Turn the small FMS Knob to enter the next desired
character.
6)
Repeat steps 4 and 5 until the desired Flight ID is
entered.
7)
Press the ENT Key. ‘updating’ will be displayed as
the Flight ID is loaded into the system.
Vista de pagina 53
1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 183 184

Comentarios a estos manuales

Sin comentarios