Garmin Software Version 0369.13 Guía de usuario Pagina 138

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 184
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 137
Garmin G1000 Cockpit Reference Guide for the DA40/40F
190-00324-07 Rev. A
10-2
SECTION 10 – HAZARD
AVOIDANCE
At a map range of less than 25 nm, Stormscope
lightning data is not displayed, but can still be present.
The presence of Stormscope lightning data is indicated
by the annunciation ‘LTNG < 25 nm’ in the upper right
corner.
Figure 10-5 Lightning Display Range Annunciation
Select ‘cell’ or ‘strike’ as the Stormscope
lightning mode:
1)
With the Weather Group selected, press the
ENT
Key. The cursor flashes on ‘STRMSCP LTNG’.
2)
Turn the large
FMS
Knob to select STRMSCP
MODE’.
3)
Turn the small
FMS
Knob to display the ‘Cell/Strike’
window.
4)
Turn either
FMS
Knob to select ‘Cell’ or ‘Strike’.
Press the
ENT
Key.
5)
Push the
FMS
Knob to return to the Navigation
Map Page.
Clear Stormscope lightning data from the
Navigation Map Page:
1)
Press the
MENU
Key (with the Navigation Map Page
displayed).
2)
Turn either
FMS
Knob to highlight the Clear
Stormscope® Lightning’ field and press the
ENT
Key.
Stormscope Page
1)
Turn the large
FMS
Knob until the Map Page group
is selected.
2)
Turn the small
FMS
Knob until the Stormscope Page
is selected.
Figure 10-6 Stormscope Page
Change the Stormscope lightning mode
between ‘cell’ and ‘strike’:
1)
Select the Stormscope Page.
2)
Press the
MODE
Softkey. The
CELL
and
STRIKE
Softkeys are displayed. Press the
CELL
Softkey to
display ‘CELL’ data or press the
STRIKE
Softkey to
display ‘STRIKE’ data. ‘CELLor ‘STRIKE’ is displayed
in the mode box located in the upper left corner of
the Stormscope Page.
NOTE: “Cell mode” uses a clustering program to
identify clusters of electrical activity that indicate
cells.
Change the viewing mode between 360
˚
and 120˚:
1)
Select the Stormscope Page.
2)
Press the
VIEW
Softkey. The
360
and
ARC
Softkeys
are displayed. Press the
360 Softkey to display
a 360˚ viewing area or press the ARC Softkey to
display a 120˚ viewing area.
Press the
CLEAR
Softkey to remove all Stormscope
lightning data from the display.
Vista de pagina 137
1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 183 184

Comentarios a estos manuales

Sin comentarios