Garmin Software Version 0369.13 Guía de usuario Pagina 133

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 184
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 132
Garmin G1000 Cockpit Reference Guide for the DA40/40F
190-00324-07 Rev. A
9-1
SECTION 9 – PROCEDURES
SECTION 9: PROCEDURES
9.1 ARRIVALS AND DEPARTURES
Load and Activate a Departure Procedure
1)
Press the
PROC
Key.
2)
Turn the large
FMS
Knob to highlight SELECT
DEPARTURE’.
3)
Press the
ENT
Key.
4)
If a flight plan is active, the departure airport will
be displayed as the default. A list of available
departures is also displayed. If no flight plan is
active, use the
FMS
Knobs to enter the identifier
of the desired airport. Press the
ENT
Key.
5)
Turn the large
FMS
Knob to highlight the Departure
field. Turn the small
FMS
Knob to display a list of
available departures.
6)
Turn either
FMS
Knob to select the desired departure
and press the
ENT
Key.
Figure 9-1 Select Departure
7)
A list of runways may be displayed for the departure.
Turn either
FMS
Knob to select the desired runway
and press the
ENT
Key.
8)
A list of available transitions is displayed for the
departure. Turn either
FMS
Knob to highlight the
desired transition waypoint and press the
ENT
Key.
Figure 9-2 Select Departure Transition
9)
With ‘LOAD?’ highlighted, press the
ENT
Key. The
departure will be active when the ight plan is
active.
Load and Activate An Arrival Procedure
NOTE: If any portion of an arrival procedure is
the active leg of a flight plan, the existing arrival
procedure must be deleted before changing to a
different arrival procedure.
1)
Press the
PROC
Key.
2)
Turn the large
FMS
Knob to highlight SELECT
ARRIVAL’.
3)
Press the
ENT
Key.
4)
If a ight plan is active, the destination airport
will be displayed as the default. A list of available
arrivals is also displayed. If no flight plan is active,
use the
FMS
Knobs to enter the identifier of the
desired airport. Press the
ENT
Key.
5)
Turn the large
FMS
Knob to highlight the Arrival
field. Turn the small
FMS
Knob to display a list of
available arrivals.
6)
Turn either
FMS
Knob to select the desired arrival
and press the
ENT
Key.
Vista de pagina 132
1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 183 184

Comentarios a estos manuales

Sin comentarios