Garmin Software Version 0563.05 Guía de usuario Pagina 125

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 190
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 124
Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
190-00384-08 Rev. A
SECTION 7 – NAVIGATION
7-29
3)
Press the
ENT
Key to load the frequency into the
COM frequency standby field.
4)
Press the
FMS
Knob to remove the flashing
cursor.
7.15 NEAREST AIRSPACES
Figure 7-65 Nearest Airspaces Page
Select the Nearest Airspaces Page
1)
Turn the large
FMS
Knob to select the ‘NRST’ page
group.
2)
Turn the small
FMS
Knob to select the seventh
rectangular page icon.
Airspace Alerts Box
If the projected course takes the aircraft inside an
airspace within the next ten minutes, Ahead is
displayed.
If the aircraft is within two nautical miles of an
airspace and the current course takes the aircraft
inside, ‘Ahead < 2 nm’ is displayed.
If the aircraft is within two nautical miles of an
airspace and the current course will not take the
aircraft inside, ‘Within 2 nm’ is displayed.
If the aircraft has entered an airspace, ‘Inside is
displayed.
View Additional Details for a Listed Airspace
1)
With the Nearest Airspace Page displayed, press
the
FMS
Knob to activate the cursor.
2)
Turn the large
FMS
Knob to scroll through the list,
highlighting the desired airspace.
3)
Press the
ALERTS
Softkey to place the cursor in the
AIRSPACE ALERTS’ field.
4)
Turn either
FMS
Knob to select the desired
airspace.
5)
Press the
FMS
Knob to remove the flashing
cursor.
View and Quickly Load the Frequency for a
Controlling Agency
1)
With the Nearest Airspace Page displayed, press the
FREQ
Softkey to place the cursor in ‘FREQUENCIES’
field.
2)
Turn either
FMS
Knob to select the desired
frequency.
3)
Press the
ENT
Key to load the frequency into the
COM frequency standby field.
4)
Press the
FMS
Knob to remove the flashing
cursor.
Vista de pagina 124
1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 189 190

Comentarios a estos manuales

Sin comentarios