Garmin Software Version 0563.05 Guía de usuario Pagina 148

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 190
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 147
Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
190-00384-08 Rev. A
10-8
SECTION 10 – HAZARD
AVOIDANCE
Traffic Advisory System (TAS) (Optional)
Refer to the Honeywell KTA 870 Pilot’s Guide for a
detailed discussion of the KTA 870 system.
System Self Test
1)
Set the range to 2/6 nm.
2)
Press the
STANDBY
Softkey.
3)
Press the
TEST
Softkey.
4)
Self test takes approximately eight seconds to
complete. When completed successfully, traffic
symbols are displayed as shown in Figure 10-12
and a voice alert “TAS System Test OK” is heard.
If the self test fails, the system reverts to Standby
Mode and a voice alert “TAS System Test Fail” is
heard.
Figure 10-12 Self Test OK Display
Displaying Traffic on the Traffic Map Page
1)
Turn the large
FMS
Knob to select the Map Page
Group.
2)
Turn the small
FMS
Knob to select the second
rectangular page icon.
3)
Press the
NORMAL
Softkey to begin displaying
traffic. ‘OPERATING’ is displayed in the Traffic Mode
field.
4)
Press the
ALT MODE
Softkey to change the altitude
volume. Select the desired altitude volume by
pressing the
BELOW
,
NORMAL
,
ABOVE
, or
UNREST
(unrestricted) Softkey. The selection is displayed in
the Altitude Mode field.
5)
Press the
STANDBY
Softkey to place the system in
the Standby Mode. ‘STANDBY’ is displayed in the
Traffic Mode field.
6)
Rotate the
Joystick
clockwise to display a larger
area or rotate counter-clockwise to display a smaller
area.
Traffic, Out of
Range
Proximity Traffic,
1000’ above &
descending
Traffic Mode
Figure 10-13 Traffic Map Page
“Non-Bearing” Traffic (system
is unable to determine bearing),
distance is 8.0 nm, 1190’ above
and descending
Traffic Advisory,
aircraft is 400’ below
& climbing
Altitude Mode
Vista de pagina 147
1 2 ... 143 144 145 146 147 148 149 150 151 152 153 ... 189 190

Comentarios a estos manuales

Sin comentarios