Garmin Software Version 0563.05 Guía de usuario Pagina 58

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 190
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 57
Garmin G1000 Cockpit Reference Guide for the Cessna Nav III
190-00384-08 Rev. A
5-2
SECTION 5 – AUDIO PANEL
5.1 COM RADIO SELECTION
Pressing the COM1 MIC or COM2 MIC Key selects
the active transmitter (i.e., microphone). The associated
receiver audio (COM1 or COM2) also becomes selected
when the COM MIC Key is pressed.
To prevent deselecting the desired received audio
when pressing another COM MIC Key, press the already
selected COM1 or COM2 Key before pressing the other
COM MIC Key.
Figure 5-2 Transceivers
5.2 CABIN SPEAKER
Pressing the SPKR Key selects and deselects the cabin
speaker. All of the radios can be heard over the cabin
speaker. Speaker audio is muted when the PTT is pressed.
Certain aural alerts and warnings (autopilot, traffic,
altitude) are always heard on the speaker, even when the
speaker is not selected.
Figure 5-3 Passenger Address and Speaker Keys
5.3 PASSENGER ADDRESS (PA) SYSTEM
(T)182T AND (T)206H ONLY
A passenger address system is available for delivering
voice messages over the cabin speaker. When the PA Key
is selected on the Audio Panel, the COM MIC Annunciator
is extinguished, and the active COM frequency changes to
white, indicating that there is no COM selected. A Push-to-
Talk (PTT) must be pressed to deliver PA announcements.
The PA Annunciator flashes about once per second while
the PTT is depressed.
5.4 MARKER BEACON RECEIVER
The marker beacon receiver is always on. Only the
marker beacon audio can be turned off. Figure 5-4 shows
the marker beacon annunciators on the PFD.
When the MKR/MUTE Key is pressed, the key an-
nunciator is lit and the audio tone can be heard over the
speaker or headsets during marker beacon reception.
When the tone is active, pressing the MKR/MUTE Key
once mutes the audio but does not affect the marker an-
nunciator. The audio returns when the next marker signal
is received.
To turn off the marker beacon audio, press the MKR/
MUTE Key once when there is no marker indication pres-
ent, or press twice when an indication is present. The key
annunciator extinguishes when the marker beacon audio
is turned off.
Outer Marker Inner Marker
Altimeter
Middle Marker
Figure 5-4 Marker Beacon Annunciators on the PFD
Marker Beacon Signal Sensitivity
The HI SENS Key can be pressed for increased marker
beacon signal sensitivity.
Vista de pagina 57
1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 189 190

Comentarios a estos manuales

Sin comentarios