
Garmin G1000 Cockpit Reference Guide for the Socata TBM 850
190-00708-00 Rev. A
SECTION 6 – AUTOMATIC
FLIGHT CONTROL
6-34
Flying a WAAS precision approach:
1)
Arm flight director modes for a precision
approach:
a)
Make sure the navigation source is set to GPS (use
CDI Softkey to change navigation source).
b)
Select the Runway 35R LPV approach for KCOS into
the flight plan.
2)
Press the APR Key once clearance for approach has
been acquired. GPS Approach Mode is activated
and Glidepath Mode is armed.
3)
Once the glidepath is captured, Glidepath Mode
becomes active. The flight director now provides
guidance to the Missed Approach Point.
4)
There are two options available at this point, as the
autopilot flies the approach:
• Push the
AP DISC Switch at the Decision height
and land the aircraft.
• Use the
GA Switch
to execute a missed approach.
4
GPS APR/
G
P
M
ode
FALUR
1
2
3
GPS NA
V Mode
KCOS
HABUK
PYNON
CEGIX
Figure 6-41 LPV Approach to KCOS
Comentarios a estos manuales