
Garmin G1000 Cockpit Reference Guide for the Socata TBM 850
190-00708-00 Rev. A
SECTION 6 – AUTOMATIC
FLIGHT CONTROL
6-33
Approach
Flying an ILS approach:
1)
Transition from GPS Navigation Mode to Heading
Select Mode.
a)
Select the Runway 35L ILS approach for KCOS
into the flight plan and select ‘VECTORS’ for the
transition.
b)
Use the HDG Knob to set the Selected Heading
after getting vectors from ATC.
c)
Press the HDG Key. The autopilot turns the aircraft
to the desired heading.
d)
Use Heading Select Mode to comply with ATC
vectors as requested.
2)
Arm LOC Approach and Glideslope modes.
a)
Ensure the appropriate localizer frequency is
tuned.
b)
Press the APR Key when cleared for approach to arm
Approach and Glideslope modes. ‘LOC’ and ‘GS’
appear in white as armed mode annunciations.
c)
The navigation source automatically switches to LOC.
After this switch occurs, the localizer signal can be
captured and the flight director determines when to begin
the turn to intercept the final approach course. The flight
director now provides guidance to the Missed Approach
Point.
3)
There are two options available at this point, as the
autopilot flies the ILS approach:
• Push the AP DISC Switch at the decision height
and land the aircraft.
• Use the GA
Switch to execute a missed
approach.
HDG Mode
LOC
A
PR/
G
S
M
ode
PETEY
1
2
3
GPS NA
V Mode
KCOS
PYNON
Figure 6-40 ILS Approach to KCOS
Comentarios a estos manuales