Garmin Software Version 0719.00 Guía de usuario descargar pdf (Pagina 75)

Garmin G1000 Cockpit Reference Guide for the Socata TBM 850

190-00708-00 Rev. A

SECTION 6 – AUTOMATIC

FLIGHT CONTROL

6-9

Flight Level Change Mode (FLC)

NOTE: The Selected Altitude should be set before

selecting Flight Level Change Mode.

Flight Level Change Mode is selected by pressing the

FLC Key. This mode acquires and maintains the Airspeed

Reference while climbing or descending to the Selected

Altitude (shown above the Altimeter). When Flight Level

Change Mode is active, the ﬂight director continuously

monitors Selected Altitude, airspeed, Mach, and altitude.

Figure 6-10 Flight Level Change Mode (IAS)

Selected Altitude Capture

Mode Armed

Flight Level Change

Mode Active

Airspeed

Reference

Airspeed

Reference

Bug

Airspeed

Reference

The Airspeed Reference is set to the current airspeed

upon mode activation. Flight Level Change Mode is

indicated by a green ‘FLC’ annunciation beside the

Airspeed Reference in the AFCS Status Box. The Airspeed

Reference is also displayed directly above the Airspeed

Indicator, along with a bug corresponding to the Airspeed

Reference along the tape.

Engine power must be adjusted to allow the autopilot

to ﬂy the aircraft at a pitch attitude corresponding to the

desired ﬂight proﬁle (climb or descent) while maintaining

the Airspeed Reference. The ﬂight director maintains the

current altitude until either engine power or the Airspeed

Reference are adjusted and does not allow the aircraft to

climb or descend away from the Selected Altitude.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 227 228

Sin comentarios

Garmin Software Version 0719.00 Guía de usuario Pagina 75