Garmin Software Version 0719.00 Guía de usuario Pagina 128

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 228
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 127
Garmin G1000 Cockpit Reference Guide for the Socata TBM 850
190-00708-00 Rev. A
SECTION 7 – NAVIGATION
7-24
4)
Turn the large
FMS
Knob to select the desired
airport.
5)
Press the
ENT
Key.
Select a Recently Entered Airport Identifier
1)
With the Airport Information Page displayed, press
the
FMS
Knob to activate the cursor.
2)
Turn the small
FMS
Knob to the left. Initially, a flight
plan waypoint list is displayed as in Figure 7-54.
The list is populated only when navigating a flight
plan.
3)
Turn the small
FMS
Knob to the right to display the
‘RECENT’ airports as shown in Figure 7-56.
Figure 7-56 Recently Entered Airports List
4)
Turn the large
FMS
Knob to select the desired
airport.
5)
Press the
ENT
Key.
Select an Airport by Facility Name or City Location
1)
With the Airport Information Page displayed, press
the
FMS
Knob to activate the cursor.
2)
Turn the large
FMS
Knob to select the facility name
or location (city) field.
3)
Enter the desired facility name or city.
4)
Press the ENT Key.
5)
To remove the flashing cursor, press the
FMS
Knob.
Access Runway Information
1)
With the Airport Information Page displayed, press
the
FMS
Knob to activate the cursor.
2)
Turn the large
FMS
Knob to place the cursor on the
‘RUNWAYS’ identifier field.
3)
Turn the small
FMS
Knob in the direction of the
green arrow to display the next runway for the
selected airport. Continue turning the small
FMS
Knob to select the desired runway.
4)
To remove the flashing cursor, press the
FMS
Knob.
Access Frequency Information
1)
With the Airport Information Page displayed, press
the
FMS
Knob to activate the cursor.
2)
Turn the large
FMS
Knob to move the cursor to the
Frequencies box.
3)
Turn either
FMS
Knob to scroll through the list,
placing the cursor on the desired frequency. If a
listed frequency has sector or altitude restrictions,
the frequency is preceded by an info (‘i’) designation.
Press the
ENT
Key to view the information. The
following may be displayed with the frequency:
‘TX’ – transmit only
‘RX’ – receive only
‘PT’ – part time frequency
4)
Press the
ENT
Key to place the selected frequency
in the standby field of the COM or NAV box.
5)
To remove the cursor, press the
FMS
Knob.
Vista de pagina 127
1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 227 228

Comentarios a estos manuales

Sin comentarios