Garmin Software Version 0719.00 Guía de usuario Pagina 183

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 228
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 182
Garmin G1000 Cockpit Reference Guide for the Socata TBM 850
190-00708-00 Rev. A
SECTION 11 – ADDITIONAL
FEATURES
11-1
SECTION 11: ADDITIONAL
FEATURES
11.1 SAFETAXI
When the map range is decreased to level sufficient to
view airport detail, runways with numbers, taxiways with
identifying letters/numbers, airport Hot Spots, and airport
landmarks including ramps, buildings, control towers, and
other prominent features are shown. When the aircraft
location is within the screen boundary an airplane symbol
is shown for enhanced position awareness.
During ground operations the aircraft’s position is
displayed in reference to taxiways, runways, and airport
features. In the example shown, the aircraft is on taxiway
Bravo inside the High Alert Intersection boundary on
KSFO airport. Airport Hot Spots are outlined in magenta.
When panning over the airport, features such as runway
holding lines and taxiways are shown at the cursor.
Figure 11-1 SafeTaxi Depiction on the Navigation Map Page
The SafeTaxi database is revised every 56 days. SafeTaxi
is always available for use after the expiration date. When
turning on the G1000, the Power-up Page indicates whether
the databases are current, out of date, or not available.
The Power-up Page shows the SafeTaxi database is current
when the SafeTaxi Expires date is shown in white. When
the SafeTaxi cycle has expired, the SafeTaxi Expires date
appears in yellow. The message SafeTaxi: N/A appears in
white if no SafeTaxi data is available on the database card.
Selecting the DCLTR Softkey removes the taxiway
markings and airport identification labels. Selecting the
DCLTR-1 Softkey removes VOR station ID, the VOR
symbol, and intersection names if within the airport plan
view. Selecting the DCLTR-2 Softkey removes the airport
runway layout, unless the airport in view is part of an
active route structure. Selecting the DCLTR-3 Softkey
cycles back to the original map detail.
Configuring SafeTaxi Range
1)
While viewing the Navigation Map Page, press the
MENU Key to display the PAGE MENU.
2)
Turn the large
FMS
Knob to highlight the Map Setup
Menu Option and press the
ENT
Key.
Figure 11-2 Navigation Map PAGE MENU, Map Setup Option
Vista de pagina 182
1 2 ... 178 179 180 181 182 183 184 185 186 187 188 ... 227 228

Comentarios a estos manuales

Sin comentarios