Garmin Software Version 0719.00 Guía de usuario Pagina 65

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 228
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 64
Garmin G1000 Cockpit Reference Guide for the Socata TBM 850
190-00708-00 Rev. A
5-3
SECTION 5 – AUDIO PANEL
5.5 PASSENGER ADDRESS SYSTEM
A passenger address system is activated by pressing
the PA Key to deliver messages to the passengers. The
message is heard by the other pilot on the headset only if
the INTR COM Key is enabled. PA messages are one way
from the flight deck to the passengers.
A Push-to-talk (PTT) must be pressed to deliver PA
announcements to the passengers over their headphones.
When PA is selected on the Audio Panel, the
annunciator flashes about once per second while pressing
the PTT, the COM MIC annunciator is no longer lit, and
the active COM frequency for that Audio Panel changes to
white, indicating that there is no COM selected.
Figure 5-7 PA Selection
5.6 INTERCOM
Pressing the INTR COM Key on either Audio Panel
selects and deselects the intercom on both Audio Panels.
The annunciator is lit when the intercom is active.
The CABIN Key enables two way communication be-
tween the flight deck and the cabin. Pressing the CABIN
Key on either Audio Panel selects and deselects the inter-
com between the pilot or copilot and the passengers. The
annunciator is lit when the cabin intercom is active on
either audio panel.
Figure 5-8 Intcom Selection
5.7 INTERCOM SQUELCH CONTROL
Select manual squelch for intercom audio by pressing
the MAN SQ Key to light the annunciator.
Pressing the small VOL/SQ Knob now switches
between volume and squelch adjustment by lighting
VOL
or SQ respectively.
Figure 5-9 Volume/Squelch Control
5.8 DIGITAL CLEARANCE RECORDER
AND PLAYER
Each reception of primary active COM audio is
automatically recorded in a memory block. When the next
transmission is received, it is recorded in the next memory
block, and so on. Once the 2.5 minutes of recording time
has been reached, the recorder begins recording over the
stored memory blocks, starting from the oldest block.
Powering off the unit automatically clears all recorded
blocks.
Figure 5-10 Recorder/Player
Vista de pagina 64
1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 227 228

Comentarios a estos manuales

Sin comentarios