Garmin Software Version 0719.00 Guía de usuario Pagina 145

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 228
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 144
Garmin G1000 Cockpit Reference Guide for the Socata TBM 850
190-00708-00 Rev. A
8-9
SECTION 8 – FLIGHT PLANNING
Enter a Pilot and Stores Weight
1)
Press the FMS Knob to activate the cursor and
highlight the ‘PILOT AND STORES’ field.
2)
Turn the small FMS Knob to enter the pilot and
stores weight.
3)
Press the ENT Key to confirm the entry.
The basic operating weight is calculated by adding the
basic empty weight and the pilot and stores weight.
Enter Number of Passengers
1)
Press the FMS Knob to activate the cursor and
highlight the ‘PASSENGERS #’ field.
2)
Turn the small FMS Knob to enter the number of
passengers.
3)
Press the ENT Key to confirm the entry.
Enter Average Passenger Weight
1)
Press the FMS Knob to activate the cursor and
highlight the passenger weight field.
2)
Turn the small FMS Knob to enter the average
passenger weight.
3)
Press the ENT Key to confirm the entry.
The total weight of passengers is calculated by
multiplying the number of passengers by the average
passenger weight.
Enter Cargo Weight
1)
Press the FMS Knob to activate the cursor and
highlight the ‘CARGO’ field.
2)
Turn the small FMS Knob to enter the cargo
weight.
3)
Press the ENT Key to confirm the entry.
The ‘ZERO FUEL WEIGHT’ is calculated by adding
the basic empty, pilot and stores, passenger, and cargo
weights.
Enter Fuel on Board Weight:
1)
Press the FMS Knob to activate the cursor and
highlight the ‘FUEL ON BOARD’ field.
2)
Turn the small FMS Knob to enter the fuel on
board.
3)
Press the ENT Key to confirm the entry.
Synchronizing Fuel on Board with Actual
Measured Fuel on Board
Select the FOB SYNC Softkey; or press the MENU
Key, highlight Synchronize Fuel on Board’, and
press the ENT Key. The actual measured fuel on
board is displayed in the fuel on board field.
When the aircraft is in the air and a destination
waypoint has been entered, the fuel calculations can be
completed.
Estimated landing weight = zero fuel weight +
estimated landing fuel weight.
Estimated landing fuel weight = fuel on board
weight - (fuel flow x ETE)
Excess fuel weight = estimated landing fuel weight
- fuel reserves weight
If the aircraft is on the ground or a destination way-
point has not been entered, the following fields display
invalid values consisting of six dashes:
Estimated landing weight
Estimated landing fuel weight
Excess fuel weight
Vista de pagina 144
1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 227 228

Comentarios a estos manuales

Sin comentarios