
Garmin G1000 Cockpit Reference Guide for the Socata TBM 850
190-00708-00 Rev. A
2-11
SECTION 2
FLIGHT INSTRUMENTS
2.0 nm
Enroute
(Oceanic if >200 nm
from nearest airport)
0.3 nm
Missed
Approach
1.0 nm
Approach
1.0 nm
Terminal
1.0 nm
Terminal
0.3 nm
Departure
CDI Full-scale Deflection
Refer to accompanying
approach CDI scaling figures
Drawing not to scale
Figure 2-24 Phases of Flight/CDI Scaling
1.0 nm
2 nm
350 ft
angle set
by system
0.3 nm
FAF
CDI Full-scale Deflection
CDI scale is set to the smaller of 0.3 nm
or an angle set by the syste
m
CDI scale varies if Vectors-To-Final is activated
Drawing not to scale
Figure 2-25 Typical LNAV and LNAV+V Approach CDI Scaling
1.0 nm
2 nm
FAF
0.3 nm
course width
Landing
Threshold
CDI Full-scale Deflection
angle based
on database
information
CDI scale varies if Vectors-To-Final is activated
Drawing not to scale
Figure 2-26 Typical LNAV/VNAV and LPV Approach CDI Scaling
Synchronizing the CDIs
1)
Select the AUX - System Setup Page using the FMS
Knob.
2)
Press the FMS Knob to activate the cursor. ‘Time
Format’ is highlighted.
3)
Turn the
large FMS
Knob to highlight the ‘CDI Sync’
ON/OFF field.
4)
Turn the
small FMS
Knob clockwise to ON or
counterclockwise to OFF.
5)
Press the
FMS
Knob to remove the cursor.
Comentarios a estos manuales