
190-00498-00 Rev. A Garmin G1000 Pilot’s Guide for Cessna Nav III
6-3
ENGINE INDICATION SYSTEM
6.2 ENGINE PAGE
The Engine Page is the default page for the EIS page
group, and is accessed the first time the
ENGINE softkey
is pressed from the MFD. The Engine Page can be
displayed after viewing other EIS pages by pressing the
ENGINE softkey.
At the top of the page are the dial gauge(s). Beneath are
horizontal bar indicators and readouts for critical engine
and electrical parameters.
Fuel Flow (FFLOW GPH)
The Fuel Flow Indicator displays current fuel flow in
gallons per hour (GPH). Green indicates normal fuel flow,
while any area beyond the green band is an indication of
abnormal fuel flow.
For turbocharged aircraft, the Fuel Flow Indicator
displays a small stand-alone green band indicating
maximum takeoff fuel flow, and a wide, vertical white tick
mark indicating the maximum cruise fuel flow (Model
T182 only).
Oil Pressure (OIL PRES)
The Oil Pressure Indicator displays the pressure of
the oil supplied to the engine in pounds per square inch
(PSI).
• Green – Normal operating range
• Red – Warning (minimum and maximum)
Oil Temperature (OIL TEMP)
The Oil Temperature Indicator displays the engine oil
temperature in degrees Fahrenheit.
• Green – Normal operating range
• Red – Warning
Cylinder Head Temperature (CHT) - Models 182, T182,
206, T206
The Cylinder Head Temperature (CHT) Indicator
displays the temperature of the hottest cylinder in degrees
Fahrenheit. The number of the hottest cylinder appears
in the triangle.
• Green – Normal operating range
• Red – Warning
Exhaust Gas Temperature (EGT) - Normally-Aspirated
Aircraft
For normally-aspirated aircraft, the Exhaust Gas
Temperature (EGT) Indicator displays the exhaust gas
temperature of the hottest cylinder in degrees Fahrenheit.
The number of the associated cylinder is indicated in the
triangle. There are no color bands associated with this
indicator.
Turbine Inlet Temperature (TIT) - Turbocharged Aircraft
NOTE: The pilot should refer to the Aircraft Flight
Manual (AFM) for limitations.
The Turbine Inlet Temperature (TIT) Indicator
displays the temperature at the turbine inlet in degrees
Fahrenheit.
• Green – Normal operating range
• Red – Warning
Vacuum Pressure (VAC) - Model 172
Vacuum pressure is shown on a horizontal bar
indicator. The normal operating range is indicated by the
green band.
Comentarios a estos manuales