Garmin Legacy Software Versions Guía de usuario Pagina 221

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 364
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 220
Garmin G1000 Pilot’s Guide for Cessna Nav III190-00498-00 Rev. A
7-85
MULTI FUNCTION DISPLAY
An arrival can be loaded from the Arrival Information
Page.
To load an arrival procedure from the
Arrival Information Page:
1. Select the desired arrival, transition and runway
using the steps described previously.
2. Press
MENU
to display the Arrival Information
Page Options.
3. Turn the
large FMS
knob to highlight ‘Load
Arrival’ and press the
ENT
key.
4. The Active Flight Plan Page is displayed. Press
FPL
to return to the Airport Arrival information
Page.
Loading an arrival procedure into the active flight plan
does NOT automatically alter the active flight plan leg or
Direct-to navigation. Once loaded, the arrival is simply
placed at the end of the flight plan. To manually transition
to a loaded arrival, see the procedure below (an alternative
method would be to remove the first occurrence of the
destination airport identifier).
To manually transition to a loaded arrival
procedure:
1. From the Active Flight Plan Page, press the
FMS
knob to activate the cursor and scroll down
through the list of loaded arrival waypoints.
2. When the desired loaded arrival waypoint
is highlighted, press the
D
irect-to
key, then
press
ENT
to highlight the Activate’ prompt
(note that any loaded arrival waypoint may be
selected).
3. Press
ENT
again to confirm activate
Vista de pagina 220
1 2 ... 216 217 218 219 220 221 222 223 224 225 226 ... 363 364

Comentarios a estos manuales

Sin comentarios