
Garmin G1000 Pilot’s Guide for Cessna Nav III 190-00498-00 Rev. A8-6
To change the Stormscope lightning mode
between ‘cell’ and ‘strike’:
1. Select the Stormscope Page.
2. Press the
MODE
softkey. The
CELL
and
STRIKE
softkeys are displayed. Press the
CELL
softkey
to display ‘CELL’ data or press the
STRIKE
softkey to display ‘STRIKE’ data. ‘CELL’ or
‘STRIKE’ is displayed in the mode box located in
the upper left corner of the Stormscope Page
OR:
3. Press the
MENU
key. The page menu is
displayed with ‘Strike Mode’ or ‘Cell Mode’
highlighted (Figure 8-4). Press the
ENT
key on
the desired selection.
To change the viewing mode between
360
˚
and 120˚:
1. Select the Stormscope Page.
2. Press the
VIEW
softkey. The
360
and
ARC
softkeys are displayed. Press the 360 softkey
to display a 360˚ viewing area or press the ARC
softkey to display a 120˚ viewing area
OR:
3. Press the
MENU
key. The page menu is
displayed. Turn the FMS knob to select the
desired view. Press the
ENT
key on the desired
selection.
To clear Stormscope lightning data from
the display:
1. Press the
CLEAR
softkey to remove all
Stormscope lightning data from the display
OR: Press the
MENU
key (Figure 8-5). Select ‘Clear
Lightning Data’ and press the
ENT
key.
Figure 8-5 Navigation Map Page Options Menu
Figure 8-4 Weather Group Map Setup Menu
OPTIONAL EQUIPMENT
Comentarios a estos manuales