Garmin Legacy Software Versions Guía de usuario descargar pdf (Pagina 65)

190-00498-00 Rev. A Garmin G1000 Pilot’s Guide for Cessna Nav III

2-35

PRIMARY FLIGHT DISPLAY

NOTE: When entering an all-letter/alphabetical

airport identiﬁer (only in the USA), the pilot must

precede it with the letter “K” (KMCI). If the

airport identiﬁer is alpha-numeric, simply enter

the three-digit identiﬁer (51K). The full ICAO

identiﬁer must be entered for all waypoints.

To select a Direct-to by identiﬁer:

1. Press the

Direct-to

key, then turn the

FMS

knobs

to select the desired waypoint identiﬁer. Press

the

ENT

key to conﬁrm the selection.

2. Press the

ENT

key again to activate the direct-to.

To select a Direct-to by city or facility name:

1. Press the

Direct-to

key, then turn the

large FMS

knob to highlight the city ﬁeld (to the right of

the identiﬁer) or facility ﬁeld (directly below

the identiﬁer) ﬁeld.

2. Turn the

FMS

knobs to enter the city (to the

right of the identifier field), or the facility

(directly below the identiﬁer ﬁeld). Once the

desired city or facility name is displayed, press

the

ENT

key to conﬁrm the selection.

3. Press the

ENT

key again to activate the direct-to.

To select a Direct-to from a list of

waypoints in an active ﬂight plan:

1. Press the

Direct-to

key, then turn the

large FMS

knob to highlight the FPL ﬁeld.

2. Turn the

small FMS

knob to display a selection

window showing all waypoints in the active

ﬂight plan.

3. Turn the

FMS

knob to scroll through the list and

highlight the desired waypoint, then press the

ENT

key.

4. Press the

ENT

key again to activate the direct-to.

To select a Direct-to from the Nearest Air

ports list:

1. Press the

Direct-to

key, then turn the

large FMS

knob to highlight the NRST ﬁeld.

2. Turn the

small FMS

knob to display a selection

window showing the 25 nearest airports.

3. Turn the

FMS

knob to scroll through the list

and highlight the desired airport, then press

the

ENT

key.

4. Press the

ENT

key again to activate the direct-to.

To select a speciﬁc course to a waypoint:

1. Press the

Direct-to

key, then turn the

FMS

knobs

to select the desired destination waypoint, then

press the

ENT

key.

2. Turn the

large FMS

knob to highlight the ‘CRS’

ﬁeld. Turn the

FMS

knobs to select the desired

course and press the

ENT

key.

3. Press the

ENT

key to activate the direct-to using

the selected course to the destination.

To cancel a Direct-to:

1. Press the

Direct-to

key, then press the

key to display the Direct-to Options menu.

2. Press the

ENT

key to cancel direct-to navigation.

If a ﬂight plan is still active, the G1000 resumes

navigating the ﬂight plan along the closest leg.

Figure 2-52 Cancel Direct-To NAV

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 363 364

Comentarios a estos manuales

Sin comentarios

Garmin Legacy Software Versions Guía de usuario Pagina 65

Comentarios a estos manuales

Relacionado con productos y manuales para Navegadores Garmin Legacy Software Versions