Garmin Legacy Software Versions Guía de usuario Pagina 271

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 364
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 270
Garmin G1000 Pilot’s Guide for Cessna Nav III190-00498-00 Rev. A
7-135
MULTI FUNCTION DISPLAY
To select a Nearest User Waypoint from the
Nearest User Waypoint Page:
1. Select the Nearest User Waypoint Page.
2. Press the
FMS kn
ob
and turn the FMS kno
b
and press the
ENT
key to select a Nearest User
Waypoint.
3. The remaining information on the Nearest User
Waypoint Page pertains to the selected Nearest
User Waypoint.
NEAREST FREQUENCIES PAGE
The Nearest Frequencies Page displays the facility name,
bearing to and distance to the five nearest ARTCC and
FSS points of communication (within 200 nautical miles
of the present position). For each ARTCC and FSS listed,
the Nearest Frequencies Page also indicates the frequency
and may be used to quickly tune the COM transceiver
to the facility frequency. The selected frequency is placed
in the standby field of the COM window and activated
using the COM Frequency Toggle key. In addition to the
ARTCC and FSS information, the Nearest Frequencies
Page includes the weather frequencies for the selected
ARTCC or FSS.
To select the Nearest Frequencies Page:
1. From any page, press and hold the
CLR
key to
select the Navigation Map Page.
2. Turn the
large FMS
knob to select the NRST
page group. NRST is displayed in the page
group icon located in the lower right corner
of the display.
3. Turn the
small FMS
knob to select the Nearest
Frequencies Page.
To select a Nearest ARTCC from the Nearest
Frequencies Page:
1. Select the Nearest Frequencies Page.
2. Press the
ARTCC
softkey and turn the
small FMS
knob to select a Nearest ARTCC.
To select and load the Nearest ARTCC Fre-
quency from the Nearest Frequencies Page:
1. Select the Nearest Frequencies Page.
2. Press the
ARTCC
softkey and turn the
large FMS
knob to select the center frequency. Press the
ENT
key to load the center frequency into the
COM frequency standby field.
Vista de pagina 270
1 2 ... 266 267 268 269 270 271 272 273 274 275 276 ... 363 364

Comentarios a estos manuales

Sin comentarios