
Garmin G1000 Pilot’s Guide for Cessna Nav III190-00498-00 Rev. A
7-21
MULTI FUNCTION DISPLAY
Track Vector
The Navigation Map Page can display a track vector as
a dashed cyan line segment with an arrowhead attached
to the end, extended to a predicted location in 60 seconds
along the current aircraft track. The track vector is useful
in minimizing track angle error.
To enable/disable the track vector:
1. With the Navigation Map Page displayed, press
the
MENU
key to display the Navigation Map
Page Menu. The cursor flashes on the ‘Map
Setup’ option.
2. Press the
ENT
key. The Map Setup Menu is
displayed.
3. Turn the
small FMS
knob to select the ‘
Map’
group and press the
ENT
key.
4. Turn the
large FMS
knob to highlight the
‘TRACK VECTOR’ field.
5. Turn the
small FMS
knob to select ‘On’ or
‘Off’. Press the
ENT
key to accept the selected
option.
6. Press the
FMS
knob to return to the Navigation
Map Page.
Wind Vector
The wind vector box is displayed in the upper right
corner of the Navigation Map Page and displays wind
direction and speed (in knots). Wind direction is
indicated by a 360 degree pointing arrow.
To enable/disable the wind vector box:
1. With the Navigation Map Page displayed, press
the
MENU
key to display the Navigation Map
Page Menu. The cursor flashes on the ‘Map
Setup’ option.
2. Press the
ENT
key. The Map Setup Menu is
displayed.
3. Turn the
small FMS
knob to select the ‘
Map’
group and press the
ENT
key.
4. Turn the
large FMS
knob to highlight the ‘WIND
VECTOR’ field.
5. Turn the
small FMS
knob to select ‘On’ or
‘Off’. Press the
ENT
key to accept the selected
option.
6. Press the
FMS
knob to return to the Navigation
Map Page.
Comentarios a estos manuales