Garmin Legacy Software Versions Guía de usuario descargar pdf (Pagina 73)

190-00498-00 Rev. A Garmin G1000 Pilot’s Guide for Cessna Nav III

2-43

PRIMARY FLIGHT DISPLAY

5. With ‘LOAD?’ highlighted, press the

ENT

key

to load the approach.

6. To activate the approach, turn the

large FMS

knob to highlight ‘ACTIVATE?’, then press the

ENT

key.

NOTE: ‘LOAD’ adds the approach to the ﬂight

plan without immediately using the approach

for navigation guidance. This allows the pilot to

continue navigating the original ﬂight plan until

cleared for the approach, but keeps the approach

available for quick activation when needed.

‘ACTIVATE’ adds the approach to the ﬂight plan

and begins navigating the approach course.

Select Arrival

Select Arrival allows the pilot to choose a published

standard terminal arrival route (STAR) for the destination

airport, or replace a current arrival with a new selection.

To select an arrival for a direct-to or ﬂight

plan destination airport:

1. From an active ﬂight plan, press the

PROC

key

to display the Procedures options window.

2. Turn the

large FMS

knob to highlight ‘Select

Arrival’, then press the

ENT

key. A window

appears listing the available arrivals for the

destination airport.

Figure 2-69 Arrival

3. Turn the

FMS

knob to select the desired arrival,

then press the

ENT

key. A window appears

listing the available transitions for the arrival.

Figure 2-70 Arrival Transition

4. Turn the

FMS

knob to select the desired transi-

tion, then press the

ENT

key.

5. A window may appear listing runways for the

arrival. Turn the

FMS

knob to select the desired

runway, then press the

ENT

key.

NOTE: The runway window is not displayed for

every arrival. ‘ALL’ may appear in the runway

field, indicating that the arrival procedure

applies to all runways. For airports with parallel

runways, ‘B’ may appear at the end of the runway

designation to indicate that the arrival procedure

applies to both runways.

Figure 2-71 Arrival Runway

6. With ‘LOAD?’ highlighted, press the

ENT

key.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 363 364

Comentarios a estos manuales

Sin comentarios

Garmin Legacy Software Versions Guía de usuario Pagina 73

Comentarios a estos manuales

Relacionado con productos y manuales para Navegadores Garmin Legacy Software Versions