Garmin Legacy Software Versions Guía de usuario Pagina 46

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 364
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 45
190-00498-00 Rev. AGarmin G1000 Pilot’s Guide for Cessna Nav III2-16
PRIMARY FLIGHT DISPLAY
Heading Indication
A digital reading of the current magnetic heading
appears on top of the HSI. A rotatable heading bug on the
compass rose marks the desired heading.
Figure 2-19 Current Heading
The selected heading appears in a box left of the lubber
line, next to the HSI. The color of the digital readout is
cyan (light blue).
Figure 2-20 Selected Heading Box
The selected course appears in a box right of the lubber
line, next to the HSI. The color of the digital readout
appears in magenta if the navigation source is GPS, or
green if the navigation source is NAV1 or NAV2.
Figure 2-21 Selected Course Box
NOTE: The heading displayed on the HSI is always
magnetic, even if the NAV ANGLE is set to ‘TRUE’
in the AUX System Setup Page on the MFD.
Turn Rate Indicator
The Turn Rate Indicator is located directly above the
rotating compass card. Tick marks to the left and right
of the lubber line denote half-standard and standard turn
rates. A magenta turn rate trend vector shows the current
turn rate. The end of the trend vector gives the heading
predicted in six seconds, based on the present turn rate.
At rates greater than 4 deg/sec, an arrowhead appears at
the end of the magenta trend vector and the prediction is
no longer valid.
Figure 2-22 Turn Rate Indicator and Trend Vector
Half-Standard Turn
Rate Tick Mark
Standard Turn
Rate Tick Mark
Turn Rate
Trend Vector
(rate > 4 deg/sec)
A standard-rate turn (3 deg/sec) is shown on the
indicator by the trend vector stopping at the standard turn
rate tick mark, corresponding to a predicted heading of 18
degrees from the current heading.
Figure 2-23 Standard-Rate Turn Indication
Turn Rate
Trend Vector
(standard rate)
Vista de pagina 45
1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 363 364

Comentarios a estos manuales

Sin comentarios